New
WATER HEATERS
Gas Heaters Europe
Warm Air Heaters Europe
Boilers Europe
Hot Water Cylinders Europe
Air Conditioning & Air Purification
Shipping Containers Europe
Renewable Energy Europe
HOME HEATING OIL TANKS
Secure Storage Europe
Smokeless Coal Europe
Firewood Europe
Briquettes & Heat Logs
WOOD PELLETS
€3,570.00
The ATAG Q51CR High-Output Gas Combi Boiler is designed for large domestic and light-commercial heating systems with substantial hot-water demand. It features a stainless-steel heat exchanger, built-in LMS controller, circulating pump and provision for up to three heating zones. The manufacturer’s technical data lists useful heating output of up to 44.9kW at 80°C/60°C and domestic hot-water delivery of up to 18.6 litres per minute at a 35°C temperature rise. A low-velocity header is required for the Q51CR installation.
10
Items sold in last 24 hours
ATAG Q51CR combi boiler
The ATAG Q51CR Gas Combi Boiler is a high-output condensing boiler designed to provide central heating and domestic hot water for large residential properties and light-commercial installations.
Part of the ATAG QR Series, the Q51CR combines a stainless-steel heat exchanger, built-in LMS control system, circulating pump and domestic-hot-water components in one appliance. Its high heating capacity makes it an option for installations with substantial heat demand and frequent hot-water use.
The Q51CR has a nominal heat input of 51kW. Its useful heating output depends on operating temperature: ATAG lists approximately 44.9kW at 80°C/60°C and 49.6kW at 50°C/30°C.
Confirm the exact supplied configuration, gas category, connection requirements and included accessories before ordering.
The ATAG Q51CR’s 51kW rating describes nominal heat input, not useful heat delivered to the heating circuit under every operating condition.
According to ATAG’s technical table, the natural-gas model has the following useful heating outputs:
| Operating condition | Minimum useful output | Maximum useful output |
|---|---|---|
| 80°C flow / 60°C return | 8.8kW | 44.9kW |
| 50°C flow / 30°C return | 9.7kW | 49.6kW |
These distinctions are important when comparing boilers. Lower-temperature condensing operation can deliver a different useful output and efficiency result from higher-temperature operation.
The selected boiler should be sized against a heat-loss calculation and the design of the heating system rather than choosing a model solely by property size.
The Q51CR is a combination boiler designed to provide both central heating and domestic hot water.
ATAG’s published UK/IE technical specification lists the following maximum hot-water flow rates:
| Temperature rise | Published hot-water flow |
|---|---|
| 35°C | 18.6L/min |
| 28°C | 23.2L/min |
A smaller temperature rise allows a higher flow rate, while a greater rise reduces the available flow. Actual performance also depends on the incoming-water temperature, supply pressure and simultaneous demand.
The Q51CR is suited to projects where hot-water performance is a major design consideration. The designer should confirm that the flow rate and temperature rise meet the property’s expected usage.
The ATAG QR Series uses a stainless-steel heat exchanger, as identified in the manufacturer’s brochure.
The heat exchanger is part of the boiler’s condensing design. Actual performance depends on correct commissioning, heating-system temperatures, system water quality, controls and ongoing servicing.
Avoid treating general efficiency ratings as a guarantee of specific running-cost savings. Energy use will vary according to the property and its operating conditions.
The Q51CR includes an LMS control system with a display and integrated boiler-management functions.
The QR Series provides two OpenTherm connection options and can support up to three mixed or unmixed central-heating zones, subject to the required system design and compatible components.
Zoning can help manage different heating areas independently. The installer must confirm control compatibility, valve arrangements, wiring and hydraulic design for the intended installation.
The Q51CR is a high-output boiler, and its installation requires careful hydraulic and flue planning.
ATAG’s installation manual states that a low-velocity header is required for the Q51CR to prevent flow problems. This is an essential design requirement, not simply an optional accessory.
Before ordering, confirm:
The installation must follow ATAG’s instructions and the regulations applying at the installation location.
The ATAG QR Series supports a range of flue configurations, including compatible concentric and twin-pipe arrangements. The manufacturer’s brochure also describes communal-flue and cascade-flue options for suitable installations.
The built-in flue non-return valve supports approved configurations, but it does not mean every flue arrangement is automatically suitable.
A qualified heating designer or installer should select the flue system after checking the building layout, route, terminal location, permissible resistance and local regulations.
Brand: ATAG
Product range: QR Series
Model: Q51CR
Appliance type: Condensing gas combination boiler
Fuel: Natural gas in the cited UK/IE technical specification
Nominal heat input: 51kW
Useful heating output at 80°C/60°C: 44.9kW maximum
Useful heating output at 50°C/30°C: 49.6kW maximum
Minimum useful output at 80°C/60°C: 8.8kW
Minimum useful output at 50°C/30°C: 9.7kW
Domestic hot-water output: 48.6kW
Hot-water flow at a 35°C rise: 18.6L/min
Hot-water flow at a 28°C rise: 23.2L/min
Seasonal space-heating energy class: A
Domestic-hot-water energy class: B
Seasonal space-heating energy efficiency: 93% in the cited technical fiche
Heat exchanger: Stainless steel
Controller: Built-in LMS
Heating zones: Up to three with suitable system components
Flue non-return valve: Built in
Low-velocity header: Required
Empty weight: Approximately 87kg
Dimensions excluding connections: Approximately 680mm high × 1000mm wide × 385mm deep
Electrical supply: 230V / 50Hz
NOx class: 6
These figures follow the ATAG QR Series technical specification for the Q51CR. Verify the exact model and national-market version before ordering.
ATAG Commercial’s QR Series brochure lists a five-year parts-and-labour warranty as standard, with longer warranty options potentially available under separate terms.
Warranty eligibility can depend on the supplied version, installation, registration, servicing and destination country. Confirm the terms applicable to your purchase before relying on a specific warranty duration.
The ATAG Q51CR is a high-output condensing combination gas boiler in the QR Series, designed for central heating and domestic hot-water demand in larger properties and suitable light-commercial settings.
Its 51kW designation is the nominal heat-input rating. ATAG lists useful heating output of up to 44.9kW at 80°C/60°C or 49.6kW at 50°C/30°C.
The manufacturer’s UK/IE technical specification lists 18.6L/min at a 35°C temperature rise and 23.2L/min at a 28°C rise. Actual flow depends on supply conditions and demand.
Yes. ATAG’s installation manual explicitly states that a low-velocity header is required for the Q51CR to prevent flow problems.
The QR Series provides control options for up to three mixed or unmixed heating zones when configured with suitable system components. The designer must verify the correct components and installation design.
It is designed for high-demand large domestic and light-commercial applications. Suitability for any specific building must be established using its heating and hot-water requirements and the manufacturer’s installation requirements.
The cited QR Series fiche lists A for seasonal space heating and B for domestic-water heating for the Q51CR. These are separate ratings and should not be presented as one universal A rating for every function.
Not automatically. The referenced ATAG technical manual identifies the UK and Ireland as its destination market. Before advertising this particular version across Europe, confirm the destination country’s certification, gas category, permitted supply pressure, installation standards and available service support.
An appropriately qualified gas-heating professional should design, install, commission and service the appliance according to ATAG’s instructions and the applicable regulations.
The ATAG Q51CR is a high-output combination boiler for suitable heating installations with substantial hot-water demand. Before ordering from EuroFuelSupply, confirm the precise market version, required low-velocity header, flue components, warranty conditions and delivery eligibility for your destination.
Fast Delivery Across the UK and Ireland
WATER HEATERS
Gas Heaters Europe
Warm Air Heaters Europe
Boilers Europe
Hot Water Cylinders Europe
Air Conditioning & Air Purification
Shipping Containers Europe
Renewable Energy Europe
HOME HEATING OIL TANKS
Secure Storage Europe
Smokeless Coal Europe
Firewood Europe
Briquettes & Heat Logs
WOOD PELLETSBuy Again & Save 10%!
Enjoy 10% off your second purchase with EuroFuelSupply. Shop again and save on your next order.
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.