New
WATER HEATERS
Gas Heaters Europe
Warm Air Heaters Europe
Boilers Europe
Hot Water Cylinders Europe
Air Conditioning & Air Purification
Shipping Containers Europe
Renewable Energy Europe
HOME HEATING OIL TANKS
Secure Storage Europe
Smokeless Coal Europe
Firewood Europe
Briquettes & Heat Logs
WOOD PELLETS
€3,315.00
The ATAG XL140 Commercial Condensing Gas Boiler is a high-output, modulating central-heating boiler designed for large commercial buildings and demanding heating installations. It has a nominal gross heat input of 136.4kW and useful heating output of up to 120kW at 80°C/60°C or 130kW at 50°C/30°C. Features include an integral modulating pump, boiler controller, modulating gas valve and cascade-management capability. The XL range supports installations of up to eight boilers in a cascade arrangement. A correctly sized low-velocity header is required for single or cascade installations.
2
Items sold in last 24 hours
ATAG XL140 commercial boiler
The ATAG XL140 Commercial Gas Boiler is a high-output, modulating condensing boiler designed for large buildings and demanding central-heating installations. Part of the ATAG XL Commercial range, it is engineered to provide substantial heating capacity in commercial plant rooms and modular boiler systems.
The XL140 has a nominal gross heat input of 136.4kW, with useful heating output of up to 120kW at 80°C/60°C and 130kW at 50°C/30°C. These figures distinguish the gas energy entering the appliance from the useful heat delivered to the heating system.
The ATAG XL Commercial range comprises the XL70, XL110 and XL140 models. Each is designed for modulating central heating and can be installed in suitable wall-mounted or free-standing cascade configurations.
The precise installation arrangement, supplied accessories, gas specification and warranty depend on the model configuration and destination market. Refer to the manufacturer’s instructions before purchase.
The XL140’s nominal gross heat input is 136.4kW. Its useful heating output depends on the operating temperatures of the heating circuit.
| Technical rating | Output |
|---|---|
| Nominal gross heat input | 136.4kW |
| Nominal net heat input | 123kW |
| Useful output at 80°C flow / 60°C return | 120kW |
| Useful output at 50°C flow / 30°C return | 130kW |
| Modulating useful output range at 80°C/60°C | 17.6–120kW |
These are manufacturer-published figures for the natural-gas XL140. The output available in an installation depends on system temperatures, operating conditions and correct commissioning.
The distinction is important when comparing commercial boilers: 136.4kW is the nominal gross input, not the useful heating output under every condition.
The ATAG XL140 uses condensing technology to recover heat from combustion gases. ATAG’s technical documentation publishes efficiency figures under specified operating conditions, including approximately 97.6% at 80°C/60°C and approximately 110.2% at 50°C/30°C on the net calorific-value basis.
Figures above 100% can occur when efficiency is expressed using the fuel’s lower heating value. They must not be compared directly with ratings calculated on a different calorific-value basis.
Actual performance depends on system temperatures, gas supply, installation design, controls, commissioning and maintenance. A published efficiency figure does not guarantee a particular reduction in operating costs.
The ATAG XL140 incorporates a modulating circulation pump, modulating gas valve and boiler control unit.
Its electronic MMI cascade controller supports commercial boiler management, while the integral air vent and electrical connection rail form part of the manufacturer’s designed equipment arrangement.
These components help the XL140 integrate into a properly engineered central-heating installation. The complete system must still be designed to meet the building’s hydraulic, electrical, gas-supply and control requirements.
One of the key applications of the ATAG XL Commercial range is a multi-boiler cascade installation.
ATAG specifies that XL boilers can be connected in cascade arrangements of up to eight boilers, with wall-mounted or free-standing layouts depending on the installation design. The manufacturer describes modular plant-room solutions with pre-built pipework and connections for suitable projects.
Cascade configurations can provide additional heating capacity by combining multiple boilers. The resulting system output depends on the selected models, design temperatures and hydraulic arrangement. The complete installation should be specified by a qualified commercial heating designer.
A correctly sized low-velocity header is required when installing a single ATAG XL boiler or a cascade of XL boilers, according to the manufacturer’s installation instructions.
The header must be matched to the required system demand and appropriate pipework. It should not be treated as an optional accessory where the manufacturer specifies it as an installation requirement.
Before ordering, confirm the required header capacity, hydraulic arrangement, gas-line sizing, flue design and relevant system connections with the installer.
The ATAG XL140 can be considered for suitably designed heating installations such as:
The boiler’s suitability should be assessed using the building’s calculated heat demand, design temperatures, available gas supply, hydraulic design and the required operating resilience.
The ATAG XL140 technical documentation includes natural-gas specifications and several approved flue categories. Gas category, supply pressure, flue configuration and installation requirements must be checked against the exact appliance identification plate and applicable documentation.
The manufacturer describes room-sealed, open-flue and over-pressure cascade-flue arrangements for appropriate configurations. Not every flue arrangement is suitable for every building, so the selected design must comply with the manual and local regulations.
Before purchase, confirm:
Brand: ATAG
Product range: XL Commercial
Model: XL140
Appliance type: Condensing commercial central-heating boiler
Fuel: Natural gas, according to the referenced technical specification
Nominal gross heat input: 136.4kW
Nominal net heat input: 123kW
Useful heating output at 80°C/60°C: 120kW
Useful heating output at 50°C/30°C: 130kW
Modulating output range at 80°C/60°C: 17.6–120kW
Efficiency at 80°C/60°C: Approximately 97.6% on the net calorific-value basis
Efficiency at 50°C/30°C: Approximately 110.2% on the net calorific-value basis
Circulation pump: Integral modulating pump
Controller: Integral boiler controller and MMI cascade controller
Gas valve: Modulating
Automatic air vent: Integral
Installation options: Wall-mounted or free-standing cascade configurations
Cascade capacity: Up to eight boilers, subject to system design
Hydraulic requirement: Correctly sized low-velocity header required
Domestic hot water: Requires a separately designed compatible system where domestic hot water is required
These figures follow the ATAG XL Commercial brochure and XL installation manual. Check the latest technical documentation and appliance plate for the exact version supplied.
The ATAG XL140 is commercial-scale gas equipment. It must be specified, installed, commissioned and serviced by appropriately qualified professionals in accordance with the manufacturer’s instructions and local regulations.
Before ordering, confirm:
ATAG’s referenced XL installation manual specifically states that its instructions cover the UK and Ireland. Before selling the relevant version into another European market, verify that its gas category, certification, installation requirements and support arrangements are suitable for the destination.
The ATAG XL140 is a high-output, modulating condensing gas boiler from the XL Commercial range, designed to provide central heating for large buildings and commercial installations.
Its nominal gross heat input is 136.4kW. ATAG specifies useful heating output of up to 120kW at 80°C/60°C or 130kW at 50°C/30°C.
No. The XL140 is a commercial central-heating boiler, not an instantaneous domestic combi boiler. Where domestic hot water is required, the system designer must specify a suitable external cylinder, heat exchanger or other compatible arrangement.
The XL Commercial range supports cascade installations of up to eight boilers, subject to the required hydraulic, gas-supply, flue and control design.
Yes. ATAG’s installation instructions require a correctly sized low-velocity header for single and cascade XL installations.
ATAG documents wall-mounted and free-standing cascade arrangements. The appropriate format depends on the plant-room layout and installation design.
Heat input is the gas energy supplied to the boiler. Useful heating output is the heat delivered to the heating system. The XL140’s nominal gross input is 136.4kW, while its useful output is up to 120kW at 80°C/60°C.
Not automatically. The referenced installation instructions are for the UK and Ireland. Confirm product certification, gas category, local regulations and service availability before supplying a particular destination.
An appropriately qualified commercial gas-heating professional should design, install, commission and maintain the boiler and its associated hydraulic, flue, electrical and gas-supply systems.
The ATAG XL140 is an option for commercial heating projects requiring high output, modulating operation and possible integration into a cascade system. Before ordering from EuroFuelSupply, confirm the precise model, product availability, required header, flue equipment, included accessories, warranty conditions and suitability for the installation country.
Fast Delivery Across the UK and Ireland
WATER HEATERS
Gas Heaters Europe
Warm Air Heaters Europe
Boilers Europe
Hot Water Cylinders Europe
Air Conditioning & Air Purification
Shipping Containers Europe
Renewable Energy Europe
HOME HEATING OIL TANKS
Secure Storage Europe
Smokeless Coal Europe
Firewood Europe
Briquettes & Heat Logs
WOOD PELLETSBuy Again & Save 10%!
Enjoy 10% off your second purchase with EuroFuelSupply. Shop again and save on your next order.
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.