New
WATER HEATERS
Gas Heaters Europe
Warm Air Heaters Europe
Boilers Europe
Hot Water Cylinders Europe
Air Conditioning & Air Purification
Shipping Containers Europe
Renewable Energy Europe
HOME HEATING OIL TANKS
Secure Storage Europe
Smokeless Coal Europe
Firewood Europe
Briquettes & Heat Logs
WOOD PELLETS
€2,965.00
The ATAG Q25CR 25kW Natural Gas Combi Boiler combines central heating and domestic hot-water production in a wall-mounted appliance. It features a stainless-steel heat exchanger, integrated 14-litre hot-water buffer, built-in LMS controller and circulating pump. Manufacturer specifications list useful heating output up to 22.1kW at 80°C/60°C and domestic hot-water delivery of up to 10.7 litres per minute at a 35°C temperature rise. Confirm fuel compatibility and installation requirements for your destination before ordering.
9
Items sold in last 24 hours
ATAG Q25CR combi boiler
The ATAG Q25CR Natural Gas Combi Boiler is a wall-mounted condensing boiler designed to provide central heating and domestic hot water from one appliance. Part of the ATAG QR Series, it combines a stainless-steel heat exchanger, an integrated hot-water buffer and built-in electronic controls.
With a nominal heat input of 25kW, the Q25CR is intended for suitable residential and smaller commercial heating applications where its output and domestic-hot-water capacity meet the installation requirements.
Unlike a basic instantaneous combi design, the Q25CR incorporates an integrated 14-litre hot-water buffer to support domestic hot-water delivery. The system combines this feature with central heating, an integrated circulating pump and ATAG’s LMS control system.
Check the exact model reference, included components, gas category and current manufacturer documentation before ordering.
The Q25CR has a nominal heat input of 25kW. Useful heating output varies depending on the flow and return temperatures of the system.
| Operating condition | Published useful heating output |
|---|---|
| 80°C flow / 60°C return | Approximately 6.1–22.1kW |
| 50°C flow / 30°C return | Approximately 6.7–24.3kW |
These figures describe different operating conditions and should not be confused with nominal heat input. Boiler sizing should be based on a building heat-loss calculation and the intended design of the heating system.
The ATAG Q25CR combines heating and domestic hot-water production in one appliance. Its integrated 14-litre buffer helps support the delivery of domestic hot water, distinguishing it from simpler designs without stored hot-water buffering.
ATAG’s published technical specifications list the following flow rates for the natural-gas Q25CR:
| Temperature rise | Published hot-water flow |
|---|---|
| 35°C | 10.7L/min |
| 28°C | 13.4L/min |
A smaller temperature rise allows a higher flow rate. Actual performance depends on inlet-water temperature, supply pressure and simultaneous demand.
When selecting a combi boiler, consider how many taps and showers may operate simultaneously. Use the manufacturer’s flow data rather than assuming that a boiler will support a fixed number of bathrooms under every condition.
The ATAG QR Series uses a stainless-steel heat exchanger as part of its condensing boiler design.
Condensing operation recovers heat from the combustion process. Actual performance depends on operating temperatures, water quality, commissioning, controls, system design and maintenance.
Published efficiency figures must be read using the manufacturer’s stated calculation method. They should not be treated as a guarantee of a particular reduction in energy bills.
The Q25CR includes an LMS controller with a display and integrated boiler-management functions.
The QR Series supports two OpenTherm connection options and can control up to three mixed or unmixed heating circuits when suitably configured with compatible system components.
Zone control may help manage different heating areas independently. The installer must confirm compatibility, wiring, valves and system design for the intended application.
The ATAG Q25CR has a wall-mounted format designed to integrate with an appropriate heating system. Its installation requires suitable pipework, gas supply, electrical connections and a compatible flue arrangement.
Available flue configurations depend on the manufacturer’s approved components, the installation layout and local requirements.
Before ordering, check the mounting surface, appliance clearance, flue route, condensate drainage and space required for future service access.
Brand: ATAG
Product series: QR Series
Model: Q25CR
Appliance type: Condensing gas combi boiler
Fuel: Natural gas for the referenced UK/Ireland specification
Nominal heat input: 25kW (gross)
Nominal heat input, net basis: 22.5kW
Useful heating output at 80°C/60°C: Approximately 6.1–22.1kW
Useful heating output at 50°C/30°C: Approximately 6.7–24.3kW
Integrated hot-water buffer: 14 litres
Hot-water flow at a 35°C rise: 10.7L/min
Hot-water flow at a 28°C rise: 13.4L/min
Heat exchanger: Stainless steel
Controller: Built-in LMS
Heating-zone control: Up to three circuits with suitable components
Circulating pump: Integrated
Flue: Compatible manufacturer-approved system
Installation: Wall mounted
Refer to the exact manufacturer’s technical sheet for current energy-label values, product identifiers, dimensions and installation limits.
The ATAG Q25CR is a gas-fired appliance and must be installed, commissioned and serviced by appropriately qualified professionals in accordance with the manufacturer’s instructions and the regulations applicable to the installation country.
Before purchase, confirm:
Important for European sales: the cited ATAG QR Series manual identifies the relevant version as intended for the UK/Ireland market. Do not assume that the same version is automatically certified for every European country. Confirm national gas categories, certification and installation compatibility before offering it for a specific destination.
The ATAG Q25CR is a wall-mounted condensing natural-gas combination boiler designed to supply central heating and domestic hot water.
Its nominal heat input is 25kW. Useful heating output is approximately 22.1kW at 80°C/60°C or 24.3kW at 50°C/30°C.
The published specification lists 10.7L/min at a 35°C temperature rise and 13.4L/min at a 28°C rise. Actual delivery depends on inlet temperature, pressure and demand.
Yes. The Q25CR includes a 14-litre integrated hot-water buffer according to the published product specifications.
The QR Series documentation lists an integrated circulating pump for the Q25CR.
The QR Series supports up to three heating circuits when configured with compatible controls and mixing valves. The required components must be specified for the actual installation.
Not automatically. The referenced technical documentation identifies the UK/Ireland market. Confirm the specific version’s certification, gas category, pressure requirements and local service availability before supplying it elsewhere.
An appropriately qualified gas-heating professional should assess the installation, fit the boiler, commission the system and maintain the appliance according to ATAG’s instructions and local regulations.
The ATAG Q25CR is an option for heating projects requiring a wall-mounted natural-gas combi boiler with integrated hot-water buffering. Before ordering from EuroFuelSupply, confirm the exact model reference, product availability, included components, flue requirements, warranty terms and suitability for your destination.
Fast Delivery Across the UK and Ireland
WATER HEATERS
Gas Heaters Europe
Warm Air Heaters Europe
Boilers Europe
Hot Water Cylinders Europe
Air Conditioning & Air Purification
Shipping Containers Europe
Renewable Energy Europe
HOME HEATING OIL TANKS
Secure Storage Europe
Smokeless Coal Europe
Firewood Europe
Briquettes & Heat Logs
WOOD PELLETSBuy Again & Save 10%!
Enjoy 10% off your second purchase with EuroFuelSupply. Shop again and save on your next order.
No account yet?
Create an Account
Reviews
Clear filtersThere are no reviews yet.