New
Steel Bunded IBC & Drum Store DPU64-16 – 64 Drums or 16 IBCs
DPU64-16 bunded storage unit
The DPU64-16 Steel Bunded IBC & Drum Store is designed for businesses that need high-capacity storage for industrial drums or Intermediate Bulk Containers (IBCs). With its double-depth layout, two-level storage arrangement, heavy-duty steel construction and integrated bunded sump, this unit provides a dedicated storage solution for suitable commercial and industrial environments.
The DPU64-16 can accommodate either 16 × 1,000-litre IBCs or 64 × 205-litre drums, depending on the approved loading configuration. Its sliding doors provide access to the storage areas, while the bunded base is designed to collect liquid released from stored containers.
This unit may be suitable for large warehouses, manufacturing operations, distribution facilities, industrial yards and other sites that need organized storage for compatible packaged liquids.
Explore our Secure Storage Solutions category to compare additional commercial storage products.
Key Features of the DPU64-16 Bunded Storage Unit
- High storage capacity: Designed for up to 16 × 1,000-litre IBCs or 64 × 205-litre drums.
- Two-level storage: Supports the intended upper and lower storage arrangement.
- Heavy-duty steel construction: The referenced specification includes a 3 mm mild-steel base and structural RHS cross-members.
- Fully welded bunded sump: The product listing specifies a sump volume of approximately 4,120 litres.
- Sliding-door access: Designed to provide access to the storage area from the sides specified for the model.
- Pallet support: Galvanised steel pallet channels support the intended pallet positions.
- Crane lifting points: Listed as part of the unit’s construction; lifting must follow the manufacturer’s instructions.
- Outdoor storage design: A sloping roof and painted steel construction are described in the product information.
- Standard colour: Green RAL 6029, subject to confirmation.
Confirm the precise configuration, door arrangement, included options and manufacturer’s documentation before ordering.
High-Capacity Storage for IBCs and Industrial Drums
The DPU64-16 offers two alternative storage configurations, helping businesses select a suitable arrangement based on their container type and site requirements.
Storage for 16 IBCs
The unit is designed to accommodate up to sixteen 1,000-litre IBCs across two levels. Before ordering, check the dimensions of the IBCs and pallets, the available handling equipment, the permitted loading per level and the access route to the installation area.
Storage for 64 standard drums
Alternatively, the unit is designed for up to sixty-four standard 205-litre drums. Confirm the drum arrangement, loading method and the manufacturer’s weight limits before use.
These capacities represent alternative configurations. They should not be interpreted as permission to store the maximum number of IBCs and drums simultaneously.
Heavy-Duty Steel Construction
The referenced DPU64-16 specification describes a 3 mm mild-steel base reinforced with RHS cross-members and pressed ribs. Structural posts, rails and support components use rolled hollow-section steel, while the sides, doors and roof use pressed mild-steel construction.
The sump is fully seam-welded, and the unit is fitted with galvanised steel pallet channels. The steel structure is designed to support the intended storage configuration when loaded and installed according to the manufacturer’s instructions.
The product listing also describes crane lifting points. These must only be used in accordance with the manufacturer’s specified lifting procedure and rated capacities. Do not assume the unit can be lifted while loaded unless the manufacturer expressly permits it.
Bunded Sump and Spill Containment
The DPU64-16 has a listed sump volume of approximately 4,120 litres. The bunded base is intended to provide secondary containment in the event of a leak or spill from a stored container.
Appropriate containment depends on the liquid being stored, the site layout, the container arrangement and the applicable regulations. Verify the exact sump capacity and technical documentation before using this figure for safety assessments or regulatory calculations.
The presence of a bunded sump does not, by itself, establish suitability for every chemical, fuel or hazardous liquid. Confirm material compatibility, fire precautions, ventilation requirements and any necessary separation of incompatible substances.
Sliding Doors and Pallet Access
The DPU64-16 is described as a double-depth store with sliding-door access. The referenced specifications describe access on both long sides, with four sliding doors in one common configuration. Door arrangements can vary between models and variants, so confirm the exact configuration supplied.
The unit accommodates standard pallet formats identified in the referenced product information, including 1,200 × 1,200 mm, 1,200 × 1,000 mm and 1,200 × 800 mm pallets. Verify compatibility with the actual pallets, containers and handling equipment used at your site.
Before ordering, confirm the access aperture, door locking arrangements, pallet-support configuration and any additional loading equipment required.
Product Specifications About DPU64-16 bunded storage unit
| Specification | Listed detail |
|---|---|
| Product name | Steel Bunded IBC & Drum Store DPU64-16 |
| Product reference | DPU64-16 |
| IBC capacity | Up to 16 × 1,000-litre IBCs |
| Drum capacity | Up to 64 × 205-litre drums |
| Sump volume | 4,120 litres on the EuroFuelSupply listing |
| External dimensions | 5,920 × 2,800 × 3,325 mm |
| Tare weight | 3,100 kg |
| Base construction | 3 mm mild steel with RHS cross-members and pressed ribs, according to the referenced specification |
| Access | Sliding doors; confirm the exact supplied arrangement |
| Pallet support | Galvanised steel pallet channels |
| Standard colour | Green RAL 6029 |
| Delivery | Custom delivery; customer offloading may be required |
Specification note: The EuroFuelSupply page lists 4,120 litres for the sump, while some comparable manufacturer and supplier documents specify 4,100 litres. Confirm the exact value, dimensions, weight, door arrangement and technical specification for the model supplied before publishing the figures as final.
Suitable Applications for Commercial and Industrial Sites
The DPU64-16 may be suitable for storage planning at:
- Manufacturing and production facilities.
- Industrial warehouses and distribution centres.
- Commercial depots and logistics sites.
- Construction and maintenance facilities.
- Agricultural and industrial premises.
- Operations handling compatible packaged liquids.
The suitability of the unit depends on the material being stored and the conditions at the installation site. Obtain the relevant safety data sheets and verify the manufacturer’s requirements before using the store for fuels, chemicals or other hazardous substances.
Delivery, Offloading and Installation
The DPU64-16 is a large, heavy industrial storage unit. Before placing an order, confirm that the delivery vehicle can access your premises and that sufficient space is available for unloading and positioning.
The product listing states that customer offloading is required and that an additional charge may apply if specialist unloading, such as a HIAB vehicle, is needed. Confirm the arrangements and charges before ordering.
The unit should be positioned on a suitable, solid and level surface in accordance with the manufacturer’s installation instructions. Verify the foundation requirements, access clearances, unloading method and lifting arrangements before delivery.
Compare Related Secure Storage Products
If you are comparing storage capacities, door arrangements or container configurations, these related EuroFuelSupply products may help:
- 2 IBC / 8 Drum Steel Dual Purpose Sliding Door Storage Unit — a smaller-capacity option for two IBCs or eight drums.
- 4 IBC / 16 Drum Steel Dual Purpose Sliding Door Storage Unit — for a lower-capacity dual-purpose arrangement.
- 8 IBC / 32 Drum Steel Storage Unit — for businesses comparing an intermediate storage capacity.
- 12 IBC / 48 Drum Steel Dual Purpose Sliding Door Storage Unit — for a different capacity and footprint.
- 16 Drum Steel Storage Unit — a smaller drum-only storage option.
- Secure Storage Solutions — browse the wider product range.
For broader commercial and wholesale purchasing requirements, visit Wholesale Energy Products Europe.
Frequently Asked Questions About DPU64-16 bunded storage unit
How many IBCs can the DPU64-16 hold?
The listed capacity is up to sixteen 1,000-litre IBCs across two levels. Confirm the permitted loading configuration and container compatibility before use.
How many drums can it store?
The alternative configuration accommodates up to sixty-four standard 205-litre drums, subject to the manufacturer’s loading requirements.
What is the sump capacity?
The EuroFuelSupply listing states 4,120 litres. Some comparable specifications state 4,100 litres, so confirm the exact capacity on the technical datasheet for the unit being supplied.
What are the dimensions and weight?
The EuroFuelSupply listing gives dimensions of 5,920 × 2,800 × 3,325 mm and a tare weight of 3,100 kg. Verify the figures against the final manufacturer’s documentation before planning installation or lifting.
Does the unit have sliding doors?
Yes. Sliding doors are specified, but the exact number, access sides and locking arrangement should be confirmed for the supplied model.
Does delivery include offloading?
The current listing states that customer offloading is required and that additional charges may apply if specialist unloading is needed. Confirm the arrangements with EuroFuelSupply before ordering.
Can it store any type of chemical or fuel?
Not automatically. Verify compatibility with the stored substance, the required containment, ventilation and fire precautions, and all applicable site and regulatory requirements.
How can I request a price and delivery quotation?
You can request a quote online, visit our Contact Us page, email sales@eurofuelsupply.com, or contact us by phone/WhatsApp on +49 152 17842843.
Request a Quote for the DPU64-16 Storage Unit
Looking for a high-capacity bunded storage solution for your warehouse, industrial facility or commercial site? Contact EuroFuelSupply to discuss your container requirements, confirm the DPU64-16 specification, and obtain pricing and delivery information.
- Phone / WhatsApp: +49 152 17842843
- Email: sales@eurofuelsupply.com
- Request a Quote
- Contact EuroFuelSupply
You can also browse our Secure Storage Solutions and Wholesale Energy Products Europe pages to compare other products for your business.
EuroFuelSupply welcomes residential, commercial and wholesale enquiries. Contact our team to discuss your requirements and confirm product suitability, pricing and delivery arrangements before placing your order.
WATER HEATERS
Rinnai Water Heaters (Internal & External Installation)
Caravan Water Heaters
Commercial Continuous Flow Gas Water Heaters
Domestic Tankless Multipoint Gas Water Heaters
Gas Heaters Europe
Calor Gas Heaters
Gas Space Heaters
Warm Air Heaters Europe
Gas Warm Air Heaters
Electric Warm Air Heaters
Boilers Europe
ATAG Boilers Europe
Combi Boilers Europe
System Boilers Europe
Hot Water Cylinders Europe
Thermal Store Hot Water Cylinders
Unvented Hot Water Cylinders
Vented Hot Water Cylinders
Commercial Hot Water Cylinders
Air Conditioning & Air Purification
Daikin Air Conditioning Europe
Dehumidifiers Europe
Humidifiers Europe
Air purifiers Europe
Shipping Containers Europe
High Cube Containers
Standard Containers (20ft, 40ft)
Modified / Custom Containers
Refrigerated Containers
Storage Containers
Renewable Energy Europe
HOME HEATING OIL TANKS
Bunded Oil Tanks
AdBlue tanks Europe
Fire-protected oil tanks Europe
Fuel Bank Or Fuel Station Oil Tanks
Single Skinned oil Tanks
Secure Storage Europe
Smokeless Coal Europe
Firewood Europe
Briquettes & Heat Logs
WOOD PELLETS


Reviews
Clear filtersThere are no reviews yet.