Innovita Primo 6 LPG Gas Water Heater with Flue Kit

Innovita Primo 6 LPG gas water heater

The Innovita Primo 6 LPG gas water heater with flue kit is a compact wall-mounted instantaneous water heater designed to provide hot water on demand.

The Primo 6 delivers up to 6 litres per minute at a 25°C temperature rise and has a maximum output of 11.6 kW at a 37 mbar LPG supply pressure.

It combines battery-powered electronic ignition, flame-failure protection, A+ ErP efficiency and Low-NOx combustion in a compact appliance designed for suitable LPG hot-water installations.

The Innovita Primo 6 is particularly relevant to static caravans, holiday homes and suitable off-grid LPG installations where compact, instantaneous hot-water production is required.

Key Features

• Innovita Primo 6 LPG gas water heater
• Compatible flue kit included with this product configuration
• Instantaneous hot-water production
• Up to 6 L/min at ΔT25°C
• 11.6 kW maximum heat capacity
• 11.6 kW maximum output
• Minimum heat capacity approximately 6.6 kW
• Minimum output approximately 5.8 kW
• LPG operation
• 37 mbar LPG supply pressure
• A+ ErP energy rating
• Approximately 89% efficiency at maximum power
• Battery-powered electronic ignition
• Battery supplied
• No mains electrical connection required for ignition
• Flame-failure device
• Low-NOx combustion
• Maximum NOx approximately 29 mg/kWh
• Maximum water temperature 60°C
• Operating water pressure 0.2–10 bar
• 90 mm flue diameter
• 1/2-inch BSP water and gas connections
• Compact wall-mounted construction
• Approximately 8.5 kg empty weight

The available Primo 6 specifications support these core product characteristics.

6 L/min Instantaneous LPG Water Heater

The Innovita Primo 6 is an instantaneous LPG water heater.

Instead of storing hot water in a conventional cylinder, the appliance heats water as it passes through the water heater when hot water is required.

The published maximum flow is:

6 L/min at ΔT25°C

Actual water flow depends on incoming cold-water temperature, water pressure, selected hot-water temperature and operating conditions.

For customers searching for a 6 L/min LPG water heater, the Innovita Primo 6 provides a compact solution for suitable installations.

11.6 kW LPG Gas Water Heater

The Innovita Primo 6 has a maximum heat capacity and output of approximately 11.6 kW under the specified operating conditions.

Published specifications list:

• Minimum heat capacity: 6.6 kW
• Maximum heat capacity: 11.6 kW
• Minimum output: 5.8 kW
• Maximum output: 11.6 kW

The maximum output is specified at a 37 mbar LPG supply pressure.

LPG Operation

The Primo 6 LPG model is designed for LPG fuel with a published supply pressure of 37 mbar.

Before installation, the gas supply, appliance configuration and applicable regulations must be checked for the country where the water heater will be installed.

Gas appliances should be installed and commissioned by an appropriately qualified professional.

A+ ErP Energy Rating

The Innovita Primo 6 is listed with an A+ ErP energy rating.

Published product specifications also give approximately 89% efficiency at maximum power.

The A+ rating is an important specification for customers comparing compact LPG water heaters for caravans, holiday homes and other suitable applications.

Battery-Powered Electronic Ignition

The Primo 6 uses battery-powered electronic ignition.

The appliance does not require a conventional mains electrical connection for ignition, which can be particularly useful for suitable caravan and off-grid installations.

The battery is included according to the published product specification.

Flame-Failure Protection

The Innovita Primo 6 incorporates a flame-failure device (FFD).

This safety system is designed to shut off the gas supply if the burner flame is lost.

The published product specifications identify flame-failure protection as a standard safety feature.

Low-NOx LPG Water Heater

The published specifications list maximum NOx emissions of approximately 29 mg/kWh for the Primo 6.

This makes Low-NOx performance an important specification for customers comparing modern LPG gas water heaters.

Static Caravan Water Heater

The Innovita Primo 6 LPG water heater is particularly relevant to static caravan applications.

Potential applications include:

• Static caravans
• Holiday homes
• Holiday lodges
• Park homes
• Suitable cabins
• Compact accommodation
• Suitable off-grid LPG installations

The exact suitability of the appliance depends on the installation, gas supply, water supply, ventilation, flue arrangement and local regulations.

Off-Grid Hot Water

Because the Primo 6 uses battery-powered electronic ignition, it does not require a permanent mains electrical connection for the ignition system.

This makes it relevant to suitable LPG-powered installations where conventional mains electricity is limited or unavailable.

However, an off-grid installation must still satisfy all applicable gas, ventilation, flue, water and safety requirements.

90 mm Flue Kit

This product configuration includes a flue kit for the Innovita Primo 6.

The published specifications identify a 90 mm flue diameter for the Primo 6. The manufacturer’s installation documentation also identifies 90 mm as the flue diameter for the Primo 6.

The flue is an important part of the installation because combustion gases must be safely discharged.

Always confirm the supplied kit, flue route, terminal position, clearances and ventilation requirements against the current installation documentation before fitting.

Compact Wall-Mounted Design

The Innovita Primo 6 has a compact wall-mounted design.

Published specifications list approximate dimensions of:

550 × 255 × 246 mm

and an empty weight of approximately:

8.5 kg.

This compact format is useful where installation space is limited.

1/2-Inch BSP Connections

The published specifications identify 1/2-inch BSP connections for both water and gas.

Connection compatibility must be checked against the existing installation before replacement or new installation.

Morco Replacement Water Heater

One of the strongest commercial search opportunities for the Innovita Primo 6 is its relationship with older Morco water heaters.

The Primo 6 is marketed as a replacement option for older models including:

• Morco EUP6
• Morco MP6
• Morco D61B
• Morco D61E

The available product information describes the Primo 6 as a direct replacement option for these older appliances.

However, customers should not assume that every existing installation can be replaced without modification.

Before purchasing, a qualified installer should check:

• Existing water heater model
• LPG supply
• Gas pressure
• Water connections
• Flue arrangement
• Ventilation
• Wall fixing points
• Appliance clearances
• Local installation requirements

Instant Hot Water Without a Storage Tank

The Primo 6 produces hot water when required rather than storing hot water in a conventional cylinder.

This makes the appliance useful for compact accommodation where available installation space is limited.

Actual hot-water delivery depends on water temperature, water pressure and the required temperature rise.

Technical Specifications

These specifications are supported by available Primo 6 product information and installation documentation.

Innovita Primo 6 vs Innovita Primo 11

The Innovita Primo 6 is the lower-capacity option compared with the Primo 11.

Innovita Primo 6

• 6 L/min at ΔT25°C
• 11.6 kW maximum output
• A+ ErP rating
• 37 mbar LPG
• 90 mm flue

Innovita Primo 11

• 12 L/min at ΔT25°C
• Approximately 19.3 kW maximum output
• A+ ErP rating
• 37 mbar LPG
• 110 mm flue

The Primo 6 is therefore suited to lower hot-water demand, while the Primo 11 provides substantially greater flow capacity.

Frequently Asked Questions

Is the Innovita Primo 6 an LPG water heater?

Yes. The Innovita Primo 6 is an instantaneous LPG gas water heater.

How many litres per minute does the Primo 6 deliver?

The published maximum flow is 6 L/min at a 25°C temperature rise.

What is the output of the Innovita Primo 6?

The published maximum output is 11.6 kW at the specified LPG supply pressure.

Does the Primo 6 require mains electricity?

No permanent mains electrical connection is required for ignition. The appliance uses battery-powered electronic ignition.

What LPG pressure does the Primo 6 use?

The published LPG supply pressure is 37 mbar.

Is the Innovita Primo 6 suitable for static caravans?

It is commonly marketed for static caravans and other suitable LPG hot-water installations. The installation must meet all manufacturer and local requirements.

Can the Primo 6 replace a Morco EUP6?

The Primo 6 is marketed as a replacement for the Morco EUP6. However, existing pipework, flue, fixing and installation requirements should be checked by a qualified installer before replacement.

Can it replace a Morco D61B?

The D61B is among the older Morco models listed as a replacement application for the Primo 6. Compatibility should still be confirmed before installation.

What size flue does the Primo 6 use?

The published specifications identify a 90 mm flue diameter for the Primo 6.

What is the maximum water temperature?

The published maximum water temperature is 60°C.

Is the Primo 6 A+ rated?

Yes. The published product specification lists an A+ ErP rating.

Does the Primo 6 have Low-NOx combustion?

Yes. Published specifications list maximum NOx emissions of approximately 29 mg/kWh.

Does the product include a flue kit?

Yes. This EuroFuelSupply product is specifically the Innovita Primo 6 LPG Gas Water Heater with Flue Kit configuration.

Does it need professional installation?

Yes. It is an LPG gas appliance with combustion and flue requirements. Installation and commissioning should be performed by an appropriately qualified professional according to the applicable regulations and installation instructions.

Buy Innovita Primo 6 LPG Gas Water Heater with Flue Kit

The Innovita Primo 6 LPG gas water heater with flue kit provides up to 6 L/min instantaneous hot water, 11.6 kW maximum output, A+ ErP efficiency, battery-powered electronic ignition, flame-failure protection and Low-NOx combustion.

It is particularly relevant to static caravans, holiday homes and suitable LPG-powered installations where compact instantaneous hot-water production is required.

The Primo 6 is also marketed as a replacement option for older Morco EUP6, MP6, D61B and D61E water heaters. Always confirm compatibility, flue requirements, gas supply and installation conditions before purchasing.

Choose the correct appliance for your installation and have the water heater installed and commissioned by a suitably qualified professional.