Innovita Amalfi Eco 14 RS i HM LPG Gas Water Heater with Flue Kit

€397.20

The Innovita Amalfi Eco 14 LPG is an internal sealed-chamber instantaneous gas water heater delivering up to 14 L/min at a 25°C temperature rise. It combines Low-NOx combustion, electronic flame modulation, A-rated efficiency and a compact design for domestic hot-water applications.

Fuel Supplier Europe5 Items sold in last 24 hours
11 People watching this product now!

Innovita Amalfi Eco 14 LPG Gas Water Heater with Flue Kit

Innovita Amalfi Eco 14 LPG gas water heater

The Innovita Amalfi Eco 14 LPG Gas Water Heater is a compact sealed-chamber instantaneous gas water heater designed to provide reliable domestic hot water on demand using LPG.

With a nominal hot-water production rate of up to 14 litres per minute at a 25°C temperature rise, the Amalfi Eco 14 is designed for applications where consistent hot-water delivery, compact installation and efficient gas operation are important.

Innovita’s current Amalfi Eco range identifies the 14 RS i HM as an internal sealed-chamber gas water heater, available in both natural gas and LPG versions. The LPG model is listed with a 14 L/min ΔT25°C capacity, A energy efficiency class, L load profile and 1:6 modulation ratio.

Key Features of the Innovita Amalfi Eco 14 LPG

14 L/min Instantaneous Hot Water

The Amalfi Eco 14 is designed to produce hot water as it is required rather than relying on a large storage cylinder.

Innovita specifies a hot-water production rate of 14 L/min at a 25°C temperature rise, making the unit suitable for a range of domestic hot-water applications. Actual performance depends on incoming water temperature, water pressure, flow rate and installation conditions.

LPG Gas Operation

This version of the Amalfi Eco 14 is configured for LPG operation.

Innovita lists both natural gas and LPG versions of the Amalfi Eco 14 RS i HM. The manufacturer’s current product table identifies the LPG version with code 30006800.

Sealed-Chamber Design

The Amalfi Eco 14 RS i HM is an internal sealed-chamber instantaneous gas water heater.

This configuration separates the combustion process from the room environment and uses the appropriate flue system to manage combustion air and exhaust gases.

Low-NOx Combustion

Innovita identifies Low-NOx emissions as one of the key features of the Amalfi Eco range.

The Amalfi Eco 14 uses a Low-NOx burner and electronic flame management to support controlled combustion.

High Modulation up to 1:6

The Amalfi Eco 14 RS i HM uses a modulation ratio of up to 1:6.

High modulation is designed to help maintain hot-water temperature stability across changing demand conditions, including lower flow rates.

A Energy Efficiency Class

The manufacturer lists the Amalfi Eco 14 RS i HM with an A energy efficiency class and L load profile.

Compact Installation

The appliance measures approximately 619 mm high × 385 mm wide × 230 mm deep and weighs approximately 15 kg.

Its compact format makes it suitable for installations where available equipment space needs to be carefully managed.

Innovita Amalfi Eco 14 LPG Technical Specifications

Specification Amalfi Eco 14 RS i HM LPG
Brand Innovita
Product range Amalfi Eco
Model Amalfi Eco 14 RS i HM
Fuel LPG
Product type Sealed-chamber instantaneous gas water heater
Installation Internal
Nominal hot-water production 14 L/min at ΔT 25°C
Energy efficiency class A
Load profile L
Modulation ratio Up to 1:6
Starting water flow 2.0 L/min
Dimensions 619 × 385 × 230 mm
Weight Approx. 15 kg
Protection rating IPX5D
Flame control Ionisation
Temperature control NTC probe
Burner Low-NOx
Flue Appropriate sealed-chamber flue system
LPG model code 30006800

These specifications reflect the manufacturer’s current Amalfi Eco 14 RS i HM LPG information.

Electronic Flame Modulation

The Amalfi Eco 14 uses electronic flame modulation to adapt operation to hot-water demand.

Innovita combines this with a high-frequency flow meter, NTC temperature sensor and electronic gas-valve management. The manufacturer states that the system is designed to provide rapid response and improved hot-water temperature stability.

Automatic Combustion Control

Innovita specifies an Automatic Combustion Control system for the Amalfi Eco 14 RS i HM.

This system is designed to monitor combustion conditions and support correct appliance operation.

Flue Kit Configuration

This EuroFuelSupply product is positioned as an Innovita Amalfi Eco 14 LPG gas water heater with flue kit.

The exact flue components supplied should be confirmed against your EuroFuelSupply bundle and the installation requirements for the customer’s country.

Because the Amalfi Eco 14 is a sealed-chamber appliance, the correct compatible flue system must be used. Do not substitute an unapproved flue component.

Applications

The Innovita Amalfi Eco 14 LPG can be considered for suitable applications including:

  • Residential hot-water systems
  • Houses
  • Apartments
  • Kitchens
  • Bathrooms
  • Utility areas
  • Guest accommodation
  • LPG-powered domestic hot-water installations
  • Properties requiring instantaneous gas hot water
  • Installations where compact equipment is preferred

The 14 L/min configuration provides a higher nominal flow rate than the Amalfi Eco 11, while the 17 L/min Amalfi Eco model is available for applications requiring greater hot-water capacity. Innovita lists all three within the current Amalfi Eco range.

Why Choose the Innovita Amalfi Eco 14 LPG?

The Amalfi Eco 14 combines:

  • 14 L/min hot-water production at ΔT 25°C
  • LPG operation
  • Sealed-chamber combustion
  • Low-NOx technology
  • A energy efficiency class
  • L load profile
  • Up to 1:6 modulation
  • Electronic flame control
  • Automatic Combustion Control
  • Flow meter
  • NTC temperature sensor
  • IPX5D protection
  • Compact dimensions
  • Flue-system compatibility

This makes the appliance relevant to customers searching for a 14 L/min LPG instantaneous gas water heater for domestic hot-water applications.

Frost Protection

The Amalfi Eco 14 RS i HM incorporates frost-protection components.

Innovita states that the HM model is equipped with seven anti-freeze heaters and protection down to approximately -15°C external temperature.

This feature should not be interpreted as making the appliance suitable for every outdoor installation; the Amalfi Eco 14 RS i HM itself is specified as an internal appliance.

Installation Requirements

The Innovita Amalfi Eco 14 LPG is a gas appliance and should be installed and commissioned by a suitably qualified professional.

The installer should verify:

  • LPG supply and operating pressure
  • Water pressure and flow
  • Correct appliance configuration
  • Flue system compatibility
  • Combustion-air requirements
  • Flue terminal position
  • Required clearances
  • Electrical requirements
  • Applicable national regulations
  • Gas safety requirements
  • Appliance commissioning

Do not attempt to install or modify the gas appliance or flue system yourself.

European Installation Considerations

For customers across Europe, the exact gas configuration, LPG specification, flue arrangement and national installation requirements should be confirmed before purchase.

Gas appliances may have country-specific requirements, so the installer should verify compatibility with the intended installation location.

EuroFuelSupply supplies heating and hot-water equipment to customers across European markets.

Frequently Asked Questions

What is the Innovita Amalfi Eco 14 LPG?

The Innovita Amalfi Eco 14 LPG is an internal sealed-chamber instantaneous gas water heater designed to provide hot water on demand using LPG.

How much hot water does the Amalfi Eco 14 produce?

The manufacturer specifies 14 litres per minute at a 25°C temperature rise for the Amalfi Eco 14 RS i HM.

Is the Amalfi Eco 14 available for LPG?

Yes. Innovita lists the Amalfi Eco 14 RS i HM in both natural gas and LPG versions. The LPG model is listed as code 30006800.

Is the Amalfi Eco 14 an instantaneous water heater?

Yes. It is an instantaneous gas water heater that heats water when required rather than storing a large volume in a conventional tank.

Is the Amalfi Eco 14 an internal water heater?

Yes. Innovita identifies the Amalfi Eco 14 RS i HM as an internal sealed-chamber appliance.

What is the energy efficiency rating?

Innovita lists the Amalfi Eco 14 RS i HM with an A energy efficiency class and L load profile.

What is the modulation ratio?

The Amalfi Eco 14 RS i HM has a modulation ratio of up to 1:6.

What are the dimensions?

The appliance measures approximately 619 × 385 × 230 mm and weighs approximately 15 kg.

Does the Amalfi Eco 14 have Low-NOx technology?

Yes. Innovita identifies Low-NOx emissions as a feature of the Amalfi Eco 14 RS i HM.

Does it include a flue kit?

This EuroFuelSupply listing is intended as the Amalfi Eco 14 LPG with a flue kit. The exact components included should be stated clearly in the WooCommerce product specification so customers know precisely what is supplied.

Buy Innovita Amalfi Eco 14 LPG in Europe

Looking to buy an Innovita Amalfi Eco 14 LPG gas water heater with flue kit?

EuroFuelSupply supplies heating and hot-water products to customers across Europe.

For availability, delivery information, technical questions or larger orders, contact EuroFuelSupply before purchasing.

Product: Innovita Amalfi Eco 14 RS i HM
Fuel: LPG
Type: Sealed-chamber instantaneous gas water heater
Hot-water production: 14 L/min at ΔT 25°C
Energy class: A
Load profile: L
Modulation: Up to 1:6
Installation: Internal
Flue: Compatible/supplied flue-kit configuration
Brand: Innovita

0 reviews
0
0
0
0
0

There are no reviews yet.

Be the first to review “Innovita Amalfi Eco 14 RS i HM LPG Gas Water Heater with Flue Kit”

Your email address will not be published. Required fields are marked *

Wholesale Stock Available at Energy Fuel UK

Related Products

Fast Delivery Across the UK and Ireland