Ferroli Novo 10L 2kW Electric Oversink Water Heater

Ferroli Novo 10L 2kW electric oversink water heater

The Ferroli Novo 10L 2kW Electric Oversink Water Heater is a compact storage water heater designed to provide domestic hot water close to the point of use.

The Ferroli Novo 10/2 combines a 10-litre storage capacity with a 2 kW electrical heating element and an oversink installation configuration. Its compact design makes it suitable for kitchens, offices, workshops, utility rooms, small commercial premises and other locations where a dedicated local hot-water supply is required.

Ferroli’s current international documentation describes NOVO as a small-capacity electric water-heater range consisting of 5 L and 10 L models, with both over- and under-sink configurations.

Key Features

• Ferroli Novo 10L electric water heater
• 10-litre storage capacity
• 2 kW / 2,000 W electrical power
• Oversink installation
• Ferroli Novo 10/2 configuration
• Product code GRWCTASA, where applicable
• Glass-porcelain storage tank
• Stainless-steel electrical heating element
• High-concentration magnesium anode
• Capillary temperature-control thermostat
• External temperature regulator
• LED indication when the selected temperature is reached
• Compact wall-mounted design
• Pressure relief valve
• Suitable for point-of-use hot-water applications

Ferroli Novo 10L 2kW Technical Specifications

Current European product listings identify the Novo 10/2 with 10 L capacity, 2,000 W power, 220–240 V / 50 Hz supply, 19-minute heating time from 20°C to 55°C, IP24 protection, 1/2-inch connection and approximately 430 × 238 × 238 mm dimensions.

Ferroli’s own NOVO documentation confirms the range’s 5 L and 10 L capacities, over- and under-sink configurations, stainless-steel electrical heating elements, glass-porcelain storage tank, magnesium anode and capillary thermostat.

10-Litre Storage Capacity

The Ferroli Novo 10L provides 10 litres of stored hot water.

This compact capacity is designed for smaller hot-water requirements where a large central cylinder is unnecessary.

Potential applications include:

• Kitchen sinks
• Utility areas
• Small offices
• Workshops
• Laboratories
• Staff facilities
• Small commercial premises
• Guest facilities
• Secondary hot-water points
• Point-of-use installations

The appropriate capacity depends on the actual water demand and usage pattern.

2 kW Electric Heating Element

The Ferroli Novo 10/2 is specified with a 2 kW electrical heating element. Current European product data identifies the model at 2,000 W.

The published heating time is approximately 19 minutes from 20°C to 55°C under the stated test conditions. Actual recovery time can vary depending on incoming-water temperature, thermostat setting, supply voltage, water usage and installation conditions.

Oversink Installation

This product is specifically optimized for the oversink configuration.

Ferroli confirms that the NOVO range includes both over-sink and under-sink versions in 5 L and 10 L capacities.

This makes the exact configuration important when ordering.

Oversink Novo 10L

The oversink version is designed to be positioned above the sink, with its water connections arranged for the relevant installation orientation.

Under-Sink Novo 10L

Ferroli also produces a separate under-sink configuration.

Do not assume the over- and under-sink versions are interchangeable. Confirm the exact model and connection arrangement before installation.

Glass-Porcelain Storage Tank

The Ferroli Novo uses a glass-porcelain storage tank.

Ferroli identifies the glass-porcelain tank as one of the principal features of the NOVO range.

This construction is designed for a compact domestic hot-water storage application.

Stainless-Steel Heating Element

The NOVO range incorporates stainless-steel electrical heating elements.

The 2 kW element heats the stored water within the tank. Actual heating performance depends on the operating conditions and water temperature.

Magnesium Anode Protection

The Ferroli Novo incorporates a high-concentration magnesium anode to provide protection for the storage tank.

The anode should be inspected and maintained in accordance with the manufacturer’s servicing instructions.

Its service life can vary according to:

• Water chemistry
• Water hardness
• Temperature
• Usage
• Installation conditions

Adjustable Temperature Control

The NOVO range features an external temperature regulator, together with a capillary thermostat for temperature control.

Ferroli also specifies LED indication for when the selected set point is reached.

This gives the user straightforward local control of the stored-water temperature.

Compact Design for Small Spaces

The Ferroli Novo range is specifically designed around compact dimensions.

Ferroli states that NOVO’s compact dimensions make the range particularly suitable for restricted installation spaces.

For the 10 L configuration, current European product information gives approximately:

430 mm × 238 mm × 238 mm

with an empty weight of approximately 6.5 kg.

The actual installation space and wall support should always be checked before fitting.

Energy Efficiency Class B

Current European product information identifies the Ferroli Novo 10/2 with an ErP energy efficiency class B and XXS load profile.

Actual energy consumption depends on water demand, temperature settings, incoming-water temperature and usage patterns.

Pressure Relief and Safety

Current product information identifies an operating pressure of approximately 8 bar, while Ferroli’s official NOVO range documentation specifies a pressure relief valve set to 8.5 bar.

The complete installation should include all required safety components and comply with the plumbing requirements applicable in the installation country.

IP24 Protection

The Novo 10/2 is listed with an IP24 protection rating in current European product data.

The installer must still determine whether the planned installation location is appropriate under the applicable electrical regulations and Ferroli’s installation instructions.

Where Can the Ferroli Novo 10L Be Used?

The compact 10-litre format can be considered for:

Residential applications

• Kitchens
• Utility rooms
• Guest washrooms
• Secondary hot-water points
• Small apartments

Commercial applications

• Offices
• Laboratories
• Workshops
• Staff facilities
• Small retail premises
• Service areas

Ferroli specifically identifies NOVO as suitable for small service users such as offices, laboratories and craft workshops.

Point-of-Use Hot Water

The Ferroli Novo can be used as a dedicated local hot-water source where a central hot-water system does not serve a particular location.

This can be useful when a kitchen, workshop or secondary facility is some distance from the main hot-water source.

Ferroli’s product information describes the NOVO range as suitable for adding a hot-water draw-off point in areas not served by a central system.

Ferroli Novo 10L vs Ferroli Bravo 10L

EuroFuelSupply also offers the Ferroli Bravo 10L 2kW Electric Oversink Water Heater.

Both products are 10-litre electric water heaters, but they belong to different Ferroli product families.

Ferroli officially lists NOVO and BRAVO as separate small-capacity electric water-heater ranges.

This comparison should be handled through internal links rather than duplicating the same content on both product pages.

Ferroli Novo 10L vs Novo 5L

The NOVO range currently consists of 5 L and 10 L models, both available in over- and under-sink versions.

The 10 L version is therefore the larger storage option within the current NOVO range.

It may be more appropriate where the local hot-water demand exceeds what a 5-litre unit can comfortably provide.

Installation Requirements

Installation should be performed in accordance with Ferroli’s current installation documentation and applicable local plumbing and electrical regulations.

Before installation, verify:

• Correct oversink orientation
• Wall mounting requirements
• Water connection arrangement
• Pressure relief system
• Electrical supply
• Earthing
• Isolation
• Service access
• Available installation space
• Applicable local regulations

The appliance should not be installed solely based on online photographs or generic dimensions.

Electrical Installation

The Novo 10/2 is a 2 kW electrical appliance.

The installer should verify:

• Supply voltage
• Circuit capacity
• Protection
• Earthing
• Isolation
• Cable requirements
• Local electrical regulations

The manufacturer specifies an electrical cable supplied without a plug for the NOVO range.

The final electrical connection must therefore be completed according to the manufacturer’s instructions and the requirements applicable in the installation country.

Important Product Identification

For this EuroFuelSupply product page, display the exact product information prominently:

Ferroli Novo 10L 2kW — Novo 10/2

and, where confirmed:

Product Code: GRWCTASA

This exact identification should be consistent across:

• Product title
• H1
• Technical specifications
• Product description
• Image filenames
• Image ALT text
• WooCommerce SKU/MPN
• Product schema

This gives Google and other search engines a much clearer product entity.

Why Choose the Ferroli Novo 10L 2kW?

The Ferroli Novo 10L combines:

• 10-litre storage capacity
• 2 kW electrical heating
• Oversink installation
• Compact dimensions
• Glass-porcelain storage tank
• Stainless-steel heating element
• Magnesium anode
• Capillary thermostat
• External temperature adjustment
• LED set-point indication
• Pressure relief protection
• Point-of-use hot-water capability

It is designed for customers who need a compact stored-hot-water solution rather than a large central cylinder or instantaneous gas water heater.

Frequently Asked Questions

What is the Ferroli Novo 10L 2kW?

It is a 10-litre electric storage water heater with a 2 kW heating element, designed for small hot-water requirements and available in over- and under-sink configurations.

What is the exact model?

The product is commonly identified as Ferroli Novo 10/2. Current European listings identify the oversink configuration with product code GRWCTASA.

Is this the oversink version?

Yes. This EuroFuelSupply page is specifically optimized for the oversink version.

Ferroli confirms that the 10 L NOVO is available in both over- and under-sink configurations.

How many litres does it hold?

The Ferroli Novo 10L has a 10-litre storage capacity.

What is the electrical power?

The Novo 10/2 is rated at 2,000 W / 2 kW.

How long does it take to heat?

Current European product data specifies approximately 19 minutes from 20°C to 55°C under the stated test conditions. Actual performance can vary with incoming-water temperature and installation conditions.

What is the energy efficiency class?

Current European product data identifies the Novo 10/2 as ErP Class B with an XXS load profile.

Does the Ferroli Novo have a magnesium anode?

Yes. Ferroli specifies a high-concentration magnesium anode as part of the NOVO range.

Does it have a glass-porcelain tank?

Yes. Ferroli identifies a glass-porcelain storage tank as one of the principal NOVO features.

Does it have a thermostat?

Yes. The NOVO range uses a capillary thermostat with external temperature adjustment and LED indication.

Is it suitable for kitchens?

Yes. The compact NOVO range is intended for small hot-water requirements and is suitable for applications such as kitchens, offices, laboratories and workshops.

Can it be installed under the sink?

Ferroli offers the 10 L NOVO in both oversink and undersink configurations. This specific product page is for the oversink configuration.

Is the Ferroli Novo 10L suitable for Europe?

Yes. Ferroli currently lists NOVO within its international and European electric-water-heater product portfolio, including markets such as Italy and the Netherlands.

The electrical and plumbing requirements must still be checked for the specific destination country.

Buy Ferroli Novo 10L 2kW Electric Oversink Water Heater

Looking to buy a Ferroli Novo 10L 2kW electric oversink water heater in Europe?

The Ferroli Novo 10L is designed for customers looking for a compact 10-litre electric storage water heater for kitchens, offices, workshops, utility areas and other point-of-use applications.

Before ordering, confirm:

• Ferroli Novo 10/2
• 10-litre capacity
• 2 kW electrical power
• Oversink configuration
• Exact product code
• Water connection arrangement
• Installation space
• Electrical requirements
• Destination-country regulations

For installer, trade, wholesale or project orders, provide the required quantity and delivery destination so the correct product configuration can be confirmed.