Ariston Andris Lux 30L 3kW Oversink Electric Water Heater with Kits A, B & C

Ariston Andris Lux 30L 3kW Oversink Electric Water Heater with Kits A, B & C

Ariston Andris Lux 30L 3kW oversink water heater

The Ariston Andris Lux 30L 3kW is a compact unvented electric storage water heater designed for oversink installation and point-of-use domestic hot water.

With a 30-litre storage capacity and 3kW electric heating element, the Andris Lux provides stored hot water for suitable kitchens, utility areas, bathrooms, workshops, offices and other domestic or light-commercial applications.

Ariston’s current technical data specifies the 30L oversink 3kW model with an approximately 30-minute heating time, Class C ErP rating, S tapping profile and 11.2 kg unit weight.

This EuroFuelSupply package is the Ariston Andris Lux 30L 3kW, product code 3820017, including Kits A, B and C.

Ariston Andris Lux 30L 3kW Key Features

• 30-litre storage capacity
• 3kW electric heating element
• Oversink installation
• Unvented electric storage water heater
• Approximately 30-minute heating time
• ErP Class C
• S tapping profile
• Titanium-enamelled steel tank
• Copper, nickel-free heating element
• Magnesium anode protection
• External mechanical temperature control
• Heating indicator
• Compact wall-mounted design
• Kits A, B and C included
• Ariston product code 3820017

The Andris Lux range is designed as a compact electric storage water-heater solution for point-of-use applications, with 30L available in the oversink configuration.

Technical Specifications

Ariston’s technical documentation identifies 3820017 as the 30L oversink 3kW configuration including Kits A, B and C.

30L Electric Storage Water Heater

The Andris Lux 30L is a storage water heater, rather than an instantaneous or tankless water heater.

Water is stored inside the 30-litre tank and heated by the integrated 3kW element.

The larger 30L capacity makes this configuration different from the smaller 10L and 15L Andris Lux models.

For customers searching for a 30L electric water heater for a kitchen, utility area, bathroom or light-commercial application, the Andris Lux 30L provides a compact stored-hot-water solution.

3kW Heating Element

The Andris Lux 30L uses a 3kW electric heating element.

Ariston specifies approximately 30 minutes heating time for the 30L configuration under its stated test conditions.

Actual heating time can vary according to incoming-water temperature, thermostat setting, electrical supply and operating conditions.

Oversink Installation

The 30L model is specifically designed for oversink installation.

The wall-mounted format allows the water heater to be positioned above an appropriate sink or point of use.

Potential applications include:

• Kitchens
• Utility rooms
• Bathrooms
• Guest accommodation
• Workshops
• Garages
• Offices
• Small commercial premises
• Commercial wash areas
• Point-of-use hot-water installations

Ariston’s French product information also describes Andris Lux as a compact solution for isolated water points, with 15L and 30L options and installation above or below the sink depending on configuration.

Titanium-Enamelled Tank

The Andris Lux uses a titanium-enamelled steel tank.

The product also incorporates a magnesium anode and four-bolt flange as part of its tank construction.

Regular inspection and maintenance should follow the manufacturer’s instructions and the requirements applicable to the installation.

Copper Heating Element

The Andris Lux 30L 3kW configuration uses a copper, nickel-free heating element.

Ariston identifies this element as part of the Andris Lux design.

Mechanical Temperature Control

The Andris Lux has a straightforward mechanical temperature dial on the front of the appliance.

The dial includes an “E” setting intended to optimise comfort and energy use. A heating lamp indicates when the heating cycle is operating.

Unvented Electric Water Heater

The Andris Lux 30L is an unvented electric storage water heater.

Because it is an unvented system, appropriate pressure-control and safety components are required according to the installation configuration.

This is why the Kits A, B and C are important for this particular 30L package.

Installation must comply with the current manufacturer’s instructions and the plumbing and building regulations applicable in the country of installation.

Kits A, B & C Included

One of the major commercial advantages of this particular product configuration is that Kits A, B and C are included with product code 3820017.

Kit A — Expansion Vessel & Non-Return Valve

Kit A contains an expansion vessel and non-return valve.

The expansion vessel accommodates expansion of the domestic hot water as it heats, while the non-return valve helps prevent reverse flow into the cold-water supply.

Kit B — 3.5 Bar Pressure-Reducing Valve

Kit B contains a 3.5 bar pressure-reducing valve.

The component is intended to control the incoming water pressure where required by the installation. Ariston’s documentation identifies the maximum cold-water inlet pressure designed for the Andris system as 3.5 bar.

Kit C — Discharge Tundish

Kit C contains a discharge tundish.

The tundish provides a visible indication if water is discharged through the safety system. Ariston’s documentation identifies the kit as part of the Andris Lux installation accessory system.

Important

The exact installation requirements depend on the system configuration, water pressure and applicable local regulations. The installer should determine which components are required and install them according to the current Ariston documentation.

Ariston Andris Lux 30L Dimensions

Ariston’s product documentation gives the 30L oversink model approximately:

• Height: 476mm
• Width: 447mm
• Depth: 410mm
• Weight: 11.2kg

The dimensions and weight are manufacturer specifications for the 30L oversink 3kW configuration.

Allow sufficient additional space for pipework, valves, electrical connections, servicing and installation.

ErP Class C and S Tapping Profile

The Ariston Andris Lux 30L 3kW oversink model is specified with:

• ErP Class C
• S tapping profile

These classifications distinguish the 30L model from smaller Andris Lux configurations, which have different energy classes and tapping profiles.

Ariston Andris Lux 30L vs 15L

The Andris Lux range includes both 15L and 30L models.

Ariston’s current technical table confirms these differences.

The 30L version provides double the nominal storage capacity of the 15L model while retaining the 3kW element rating.

Suitable Applications

The Ariston Andris Lux 30L can be considered for:

Kitchen Hot Water

Suitable point-of-use applications where stored hot water is required above a kitchen sink.

Utility Rooms

A practical option for utility sinks where a dedicated hot-water supply is required.

Bathrooms

The 30L storage capacity can be considered for suitable wash-area applications.

Offices and Small Commercial Areas

The Andris Lux range is also positioned for domestic and light-commercial applications.

Hospitality and Guest Facilities

It may be considered for suitable point-of-use hot-water installations where the capacity and recovery characteristics meet the application’s requirements.

Why Choose the Ariston Andris Lux 30L 3kW?

30-Litre Storage

The 30L tank provides a larger stored-water capacity than the 10L and 15L versions of the Andris Lux range.

3kW Heating

The 3kW element provides an approximately 30-minute published heating time under Ariston’s specified conditions.

Oversink Design

The 30L configuration is specifically designed for oversink installation.

Complete Kit Package

Product code 3820017 is supplied with Kits A, B and C, making the package particularly relevant to customers looking for the associated unvented-system components.

Compact Construction

The unit provides 30L storage while maintaining a relatively compact wall-mounted design.

Simple Mechanical Control

The front-mounted mechanical dial provides straightforward temperature adjustment.

Installation Requirements

The Andris Lux 30L should be installed by an appropriately qualified professional.

Before installation, check:

• Incoming water pressure
• Cold-water connection
• Hot-water connection
• Pressure-reduction requirements
• Expansion arrangement
• Safety-valve arrangement
• Discharge pipework
• Tundish position
• Electrical supply
• 3kW electrical load
• Wall structure
• Oversink clearances
• Service access
• Local plumbing regulations
• Electrical safety requirements

The installer should use the current Ariston installation documentation for the exact installation configuration.

Frequently Asked Questions

What is the Ariston Andris Lux 30L?

The Ariston Andris Lux 30L is a 30-litre unvented electric storage water heater designed for oversink installation.

Is the Andris Lux 30L an oversink water heater?

Yes. Ariston lists the 30L configuration as an oversink model.

What is the power rating?

The Andris Lux 30L oversink model has a 3kW heating element.

How long does the 30L Andris Lux take to heat?

Ariston specifies approximately 30 minutes heating time for the 30L 3kW configuration.

What is the energy rating?

The 30L 3kW oversink model has an ErP Class C rating.

What is the tapping profile?

The 30L Andris Lux has an S tapping profile.

Does the product include Kits A, B and C?

Yes. The 3820017 configuration specifically includes Kit A, Kit B and Kit C.

What is included in Kit A?

Kit A includes an expansion vessel and non-return valve.

What is included in Kit B?

Kit B includes a 3.5 bar pressure-reducing valve.

What is included in Kit C?

Kit C includes a discharge tundish.

Is this an instantaneous water heater?

No. The Andris Lux 30L is an electric storage water heater with a 30-litre tank.

What are the dimensions?

The manufacturer documentation gives approximately 476mm high × 447mm wide × 410mm deep for the 30L oversink model.

Is professional installation required?

Installation should be carried out by an appropriately qualified professional and must comply with the manufacturer’s instructions and applicable local regulations.

Buy Ariston Andris Lux 30L 3kW Oversink Water Heater

The Ariston Andris Lux 30L 3kW combines 30-litre electric hot-water storage, oversink installation and a 3kW heating element.

This 3820017 configuration includes Kits A, B and C for the associated unvented installation arrangement.

Check current EuroFuelSupply availability, exact package contents, European delivery options and installation requirements before ordering.

For European delivery, trade enquiries or multiple-unit requirements, contact EuroFuelSupply.