Viessmann Vitodens 200-W B2HE Condensing System Boiler

Viessmann Vitodens 200-W B2HE System Boiler

The Viessmann Vitodens 200-W B2HE Condensing System Boiler is a premium wall-mounted gas condensing boiler designed for efficient central heating in larger homes and suitable heating installations.

The Vitodens 200-W combines Viessmann’s stainless-steel Inox-Radial heat exchanger with a MatriX-Plus burner and Lambda Pro Plus automatic combustion control. The result is a highly efficient heating appliance designed for reliable operation, low emissions and precise combustion control.

The B2HE designation identifies the system-boiler version of the Vitodens 200-W range. Viessmann’s technical documentation lists system outputs from 1.9kW up to 32kW depending on the selected model.

Viessmann Vitodens 200-W B2HE System Boiler

The Vitodens 200-W B2HE is designed as a system boiler, meaning it provides central heating and works with a separate domestic hot-water cylinder where stored hot water is required.

This makes the system version different from the Vitodens 200-W combi models, which incorporate instantaneous domestic hot-water production.

For properties requiring stored hot water, the B2HE provides a flexible solution that can be integrated with an appropriate hot-water cylinder and heating controls.

Viessmann currently positions the Vitodens 200-W as a premium wall-mounted gas condensing boiler for larger homes, including detached houses and properties with four or more bedrooms.

Efficient Gas Condensing Technology

The Vitodens 200-W uses condensing technology to recover additional heat from the combustion process.

Viessmann specifies an energy efficiency class of A for the current Vitodens 200-W and highlights efficiency of up to 98% under its stated standard-efficiency measurement.

Actual heating-system performance depends on installation, operating temperatures, controls, heat emitters and overall system design.

Inox-Radial Stainless-Steel Heat Exchanger

A major component of the Vitodens 200-W is the Inox-Radial stainless-steel heat exchanger.

The stainless-steel construction is designed to provide durability and efficient heat transfer while supporting the boiler’s condensing operation.

Viessmann identifies the Inox-Radial heat exchanger as one of the core technologies behind the Vitodens 200-W’s efficiency and long-term reliability.

MatriX-Plus Burner

The MatriX-Plus burner is designed to provide efficient combustion with low pollutant and noise emissions.

Its stainless-steel MatriX surface is designed to withstand high temperatures and support long service life.

Viessmann identifies the MatriX-Plus burner as a central technology within the Vitodens 200-W heating system.

Lambda Pro Plus Combustion Control

The Vitodens 200-W B2HE uses Lambda Pro Plus automatic combustion control.

This system monitors combustion conditions and automatically adapts operation to changing gas quality and operating conditions.

Viessmann states that Lambda Pro Plus helps maintain consistently high efficiency and can extend inspection intervals under the applicable operating conditions.

Wide Modulation Range

The Vitodens 200-W has a modulation range of up to 1:17, allowing the boiler to adjust its output according to heating demand.

This is particularly useful during periods when the building requires less heat than the boiler’s maximum output.

A wide modulation range can help reduce unnecessary cycling and support efficient operation when correctly matched to the heating system. Viessmann specifies modulation up to 1:17 for the Vitodens 200-W.

A-Rated Energy Efficiency

The Viessmann Vitodens 200-W B2HE carries an A energy-efficiency classification.

The combination of condensing technology, the Inox-Radial heat exchanger, MatriX-Plus burner and Lambda Pro Plus combustion control is designed to deliver efficient gas heating.

The boiler should nevertheless be correctly sized and commissioned to achieve the intended system performance.

Vitodens 200-W B2HE Output Options

Viessmann’s 2024 residential technical documentation lists the B2HE system boiler with several output options.

At 50/30°C, the documented system outputs include:

• 1.9–11.0kW
• 1.9–19.0kW
• 1.9–25.0kW
• 1.9–32.0kW

At 80/60°C, the corresponding outputs are approximately:

• 1.7–10.1kW
• 1.7–17.4kW
• 1.7–22.9kW
• 1.7–29.3kW

The exact output depends on the selected B2HE model.

Important: The product variant selected on EuroFuelSupply should always be matched to the exact manufacturer’s model number and technical specification.

Compact Wall-Mounted Design

The Vitodens 200-W is designed as a wall-mounted boiler with compact dimensions.

For the B2HE system models listed in Viessmann’s residential brochure, the dimensions are approximately:

700mm high × 450mm wide × 360mm deep.

The system versions listed in the same documentation have a dry weight of approximately 33kg.

Installation must still allow all manufacturer-required servicing, ventilation and clearance requirements.

Integrated WiFi and Digital Connectivity

The Vitodens 200-W includes an integrated WiFi interface, allowing compatible heating systems to connect with Viessmann’s digital control ecosystem.

The boiler can be operated using compatible Viessmann controls and the ViCare app, subject to the specific system configuration and available connectivity. Viessmann lists integrated WiFi and ViCare connectivity among the Vitodens 200-W features.

7-Inch Colour Touch Display

The B2HE documentation highlights a 7-inch colour touchscreen for convenient operation.

The display provides a straightforward interface for monitoring and controlling the heating system, while compatible digital controls provide additional remote-management options.

Natural Gas and LPG

Viessmann’s documentation states that the Vitodens 200-W is tested and approved for natural gas and liquid gas/LPG, subject to the applicable model and configuration.

Before ordering, confirm the required fuel type and exact product configuration for the installation country.

System Boiler With Separate Hot Water Cylinder

The Vitodens 200-W B2HE is a system boiler and therefore differs from a combi boiler.

A suitable separate domestic hot-water cylinder is required where stored domestic hot water is part of the heating system.

The system-boiler configuration can be useful where the property requires a dedicated hot-water storage arrangement rather than instantaneous hot-water production.

Suitable for Larger Homes

Viessmann describes the Vitodens 200-W as suitable for larger homes, including detached houses and properties with four or more bedrooms.

However, boiler selection should never be based solely on bedroom count.

The correct output should be selected using the calculated heat demand of the property and the requirements of the complete heating system.

New Build and Boiler Replacement

The Vitodens 200-W can be used for suitable new heating installations and modernisation or replacement projects.

When replacing an existing boiler, the installer should check:

• Existing heating-system design
• Heat requirement
• Gas supply
• Flue arrangement
• Hot-water cylinder compatibility
• Heating controls
• Pipework
• Electrical requirements
• Installation clearances
• Applicable local regulations

Viessmann Vitodens 200-W B2HE Specifications

The specifications above are based on Viessmann’s B2HE residential documentation. Exact specifications can vary by output variant, so the model/MPN supplied should always be checked before installation.

Why Choose the Vitodens 200-W B2HE?

The Viessmann Vitodens 200-W B2HE is a strong option where the project requires:

• A premium gas condensing system boiler
• A-rated heating efficiency
• Up to 32kW system output
• Stainless-steel Inox-Radial heat exchanger
• MatriX-Plus burner technology
• Lambda Pro Plus combustion control
• Up to 1:17 modulation
• Wall-mounted installation
• Integrated WiFi connectivity
• Compatibility with a separate hot-water cylinder
• A compact boiler design
• A solution for suitable new-build or replacement heating projects

Buy Viessmann Vitodens 200-W B2HE in Europe

EuroFuelSupply supplies boilers and heating equipment for customers across supported European markets, including homeowners, installers, trade customers, developers, retailers and wholesale buyers.

For the Viessmann Vitodens 200-W B2HE, customers can request pricing, availability and delivery information based on the required model, quantity and destination.

For larger orders, installers, developers and trade customers can request a quotation directly from EuroFuelSupply. The company’s quote system allows customers to provide the product required, quantity, delivery country, city/postcode and project requirements.

For current availability and delivery information, contact EuroFuelSupply before ordering.

Important: Gas boiler installation, commissioning, flue installation and fuel conversion must be performed by an appropriately qualified professional and in accordance with the regulations applicable to the installation country.

Frequently Asked Questions

What is the Viessmann Vitodens 200-W B2HE?

The B2HE is the system-boiler version of the Viessmann Vitodens 200-W gas condensing boiler range. It is designed for central heating and works with a separate domestic hot-water cylinder where stored hot water is required.

What output is the Vitodens 200-W B2HE?

The B2HE residential system range documented by Viessmann includes outputs from 1.9kW up to 32kW, depending on the selected model.

Is the Vitodens 200-W B2HE a condensing boiler?

Yes. It is a gas-fired condensing system boiler using Viessmann’s Inox-Radial heat exchanger and MatriX-Plus burner technology.

Is the Vitodens 200-W B2HE a combi boiler?

No. B2HE is the system-boiler configuration. A separate domestic hot-water cylinder is required for stored hot water.

What is the difference between B2HE and a Vitodens 200-W combi?

B2HE refers to the system-boiler version, while the B2KE designation in Viessmann’s residential documentation refers to the combi configuration. The system boiler uses a separate hot-water cylinder, while the combi provides instantaneous domestic hot water.

Is the Vitodens 200-W B2HE A rated?

Yes. Viessmann lists the Vitodens 200-W with an A energy efficiency class.

Does the Vitodens 200-W B2HE support LPG?

Viessmann’s technical documentation states that the Vitodens 200-W is tested and approved for natural and liquid gas, subject to the relevant model and configuration.

Does it have a stainless-steel heat exchanger?

Yes. The Vitodens 200-W uses Viessmann’s Inox-Radial stainless-steel heat exchanger.

What is the modulation range?

The Vitodens 200-W has a modulation range of up to 1:17, depending on the model and operating conditions.

Does the Vitodens 200-W have WiFi?

Yes. Viessmann lists an integrated WiFi interface, with compatible control and monitoring through the ViCare ecosystem.

What size property is the Vitodens 200-W suitable for?

Viessmann positions the Vitodens 200-W for larger homes, including detached houses and properties with four or more bedrooms. Actual boiler sizing should be based on calculated heat loss and heating demand rather than bedroom count alone.

Can the Vitodens 200-W B2HE replace an existing boiler?

It can be suitable for some replacement projects, but the installer must confirm heat demand, flue compatibility, gas supply, controls, cylinder compatibility, clearances and local installation requirements before replacement.