Ferroli Bravo 10L 2kW Electric Oversink Water Heater

Ferroli Bravo 10L 2kW electric oversink water heater

The Ferroli Bravo 10L 2kW Electric Oversink Water Heater is a compact storage water heater designed to provide hot water close to the point of use.

The SN10SVE2.0 configuration combines a 10-litre water storage capacity with a 2 kW electrical heating element and an oversink installation arrangement. Its compact wall-mounted format makes it suitable for kitchens, utility rooms, washrooms, offices, small commercial premises and other applications where a dedicated local hot-water supply is required.

The Ferroli Bravo range is designed as a small-capacity electric water-heater family, with Ferroli offering 10, 15 and 30 litre models and different installation configurations.

Key Features

• Ferroli Bravo 10L electric water heater
• 2 kW electrical power
• 10-litre storage capacity
• Oversink installation
• Compact wall-mounted design
• Adjustable capillary thermostat
• Front temperature adjustment
• LED operating indication
• ON/OFF switch
• High-concentration magnesium anode
• Strong shock-resistant ABS outer casing
• Reinforced hanging bracket
• Pressure relief valve
• Electric cable supplied without plug
• 1/2″ male water connections
• Suitable for residential and light commercial point-of-use applications

Ferroli Bravo 10L 2kW Technical Specifications

Ferroli documentation identifies the Bravo range as a small-capacity electric water-heater family with 10 L, 15 L and 30 L models, while the SN10SVE2.0 configuration is identified in current product listings as the 10 L, 2 kW oversink version.

10-Litre Storage Capacity

The Ferroli Bravo 10L stores 10 litres of heated water, making it a compact alternative to larger domestic hot-water cylinders.

A small storage water heater can be useful when hot water is required at a specific point of use rather than throughout an entire property.

Typical applications include:

• Kitchen sinks
• Utility sinks
• Washrooms
• Guest facilities
• Small offices
• Workshops
• Commercial hand-washing areas
• Small accommodation facilities
• Point-of-use hot-water installations

The Bravo 10L should be selected according to the expected hot-water demand and installation requirements.

2 kW Electric Heating

The SN10SVE2.0 model is specified with a 2 kW electrical heating element.

The higher electrical input compared with lower-powered small water heaters can provide faster reheating, subject to water temperature, incoming-water temperature and the operating conditions of the installation.

The electrical supply should be correctly sized and installed according to local electrical regulations and the manufacturer’s installation requirements.

Oversink Installation

This particular product is the oversink configuration.

That distinction is important because Ferroli Bravo water heaters are available in different connection arrangements. The manufacturer identifies both over- and under-sink versions within the range.

The SN10SVE2.0 should therefore not be confused with the SN10SVE2.0U, which is the corresponding under-sink configuration identified by the U suffix in product documentation and listings.

Oversink vs Under-Sink

Oversink:

• Designed for installation above the sink
• Appropriate where the plumbing arrangement requires the oversink configuration
• Product designation: SN10SVE2.0

Under-sink:

• Designed for installation beneath the sink
• Different water-connection orientation
• Product designation: SN10SVE2.0U

Always check the model code before ordering to ensure the connection orientation matches the planned installation.

Adjustable Temperature Control

The Ferroli Bravo incorporates a capillary thermostat with front temperature adjustment.

This allows the user to adjust the water-heating temperature according to the requirements of the installation.

The unit also includes an operating indicator and ON/OFF switch for straightforward local control. Ferroli lists these controls among the principal Bravo range features.

Magnesium Anode Protection

The Bravo incorporates a high-concentration magnesium anode.

The anode forms part of the water-heater protection system and is an important component to inspect during servicing.

The actual service interval can depend on water quality, operating conditions and local installation conditions.

Durable ABS Outer Casing

The Ferroli Bravo uses a strong ABS outer casing designed to provide a durable external enclosure.

Ferroli identifies the casing, reinforced hanging bracket, thermostat, magnesium anode and operating controls as core features of the Bravo range.

Compact Wall-Mounted Design

With an approximate empty weight of 6.5 kg, the 10-litre version is designed as a compact small-capacity water heater.

Published Ferroli documentation gives the Bravo 10 dimensions in the region of 340 mm high × 291–330 mm wide × 300–347 mm deep, depending on the specific documentation/version. Because dimensions can vary between production generations, the exact dimensions supplied with the EuroFuelSupply product should be confirmed before installation.

Pressure Relief Valve

The Bravo range is supplied with a pressure relief valve. Ferroli’s published Bravo documentation specifies a valve set around 8.5 bar for the range.

The complete installation should include all required safety components and comply with the applicable plumbing and water-heater regulations in the destination country.

Where Can the Ferroli Bravo 10L Be Used?

The Ferroli Bravo 10L can be considered for applications including:

Residential

• Kitchen sinks
• Utility rooms
• Guest washrooms
• Small apartments
• Secondary hot-water points

Commercial

• Office washrooms
• Staff facilities
• Small retail premises
• Workshops
• Service areas
• Small hospitality facilities

Point-of-Use Applications

The compact 10-litre format is particularly relevant where a local hot-water source is required close to the point of use rather than a large central hot-water system.

Ferroli Bravo 10L vs Ferroli Novo 10L

EuroFuelSupply also lists the Ferroli Novo 10L 2 kW electric water heater.

These products should not be treated as identical simply because both have 10-litre capacity and 2 kW electrical power.

The Bravo is part of Ferroli’s Bravo small-capacity range, while Novo is a separate Ferroli product family. Ferroli describes the Novo range with a glass-porcelain storage tank, stainless-steel electrical heating elements and magnesium-anode protection.

This gives you an excellent internal-link opportunity between the two product pages without creating duplicate content.

Installation Requirements

The Ferroli Bravo 10L should be installed by a suitably qualified professional.

Installation should account for:

• Correct oversink orientation
• Water connections
• Pressure relief and safety components
• Electrical supply
• Earthing
• Appropriate isolation
• Wall mounting
• Service access
• Local plumbing regulations
• Local electrical regulations
• Manufacturer installation instructions

The appliance should not be installed solely on the basis of product photographs or generic dimensions.

Important Model Identification

When ordering, verify that the product is the SN10SVE2.0 oversink configuration.

Do not confuse it with:

SN10SVE2.0U — under-sink configuration

This distinction is particularly important because the connection arrangement differs between the two versions. Current European product listings identify the U suffix as the under-sink variant.

Why Choose the Ferroli Bravo 10L 2kW?

The Ferroli Bravo 10L provides a combination of:

• 10-litre storage capacity
• 2 kW electrical heating
• Compact oversink design
• Adjustable thermostat
• LED operating indication
• ON/OFF control
• Magnesium anode
• ABS outer casing
• Reinforced mounting bracket
• Local point-of-use hot water

It is designed for customers who need a compact electric storage water heater rather than a large central hot-water cylinder.

Frequently Asked Questions

What is the Ferroli Bravo 10L 2kW?

It is a small-capacity electric storage water heater with 10 litres of storage capacity and a 2 kW heating element. The SN10SVE2.0 configuration is designed for oversink installation.

Is this Ferroli Bravo 10L an oversink water heater?

Yes. The SN10SVE2.0 is the oversink configuration. The corresponding SN10SVE2.0U model is the under-sink version.

How many litres does the Ferroli Bravo 10L hold?

The storage capacity is 10 litres.

What is the power rating?

The SN10SVE2.0 configuration is rated at 2 kW. Current product listings identify the SN10SVE2.0 as the 10-litre, 2 kW oversink version.

What is the difference between SN10SVE2.0 and SN10SVE2.0U?

The main difference is the installation orientation. SN10SVE2.0 is the oversink configuration, while SN10SVE2.0U is the under-sink configuration. The connection orientation should be checked before ordering.

Does it have a thermostat?

Yes. Ferroli specifies a capillary thermostat with front temperature adjustment for the Bravo range.

Does the Ferroli Bravo have a magnesium anode?

Yes. Ferroli specifies a high-concentration magnesium anode as one of the Bravo’s features.

Is the Ferroli Bravo suitable for Europe?

The Bravo is part of Ferroli’s international small-capacity electric water-heater range, with Ferroli product documentation and market information available across European markets.

However, electrical, plumbing and installation requirements should always be checked for the destination country.

Can I install it myself?

Installation should follow Ferroli’s instructions and the applicable local electrical and plumbing regulations. A suitably qualified professional should handle the installation where required.

Buy Ferroli Bravo 10L 2kW Electric Oversink Water Heater

Looking to buy a Ferroli Bravo 10L 2kW electric oversink water heater for a residential, commercial or point-of-use hot-water application?

EuroFuelSupply supplies heating and hot-water equipment to customers across Europe.

Before ordering, confirm:

• SN10SVE2.0 model configuration
• Oversink installation requirement
• 10-litre capacity
• 2 kW electrical rating
• Destination-country electrical requirements
• Water connection arrangement
• Installation space
• Required safety components

For trade, installer, project or multiple-unit requirements, request a quotation from EuroFuelSupply.