Heatrae Sadia Amptec C900 9kW Electric Boiler Pack

Heatrae Sadia Amptec C900 9kW electric boiler

The Heatrae Sadia Amptec C900 9kW Electric Boiler Pack is a compact electric flow boiler package designed for central heating applications where an electric boiler is required.

The C900 provides a 9kW heat output and is designed to work with standard radiators, circulating pumps, programmers, room thermostats and thermostatic radiator valves. It can be installed on suitable sealed or open-vented heating systems in accordance with the manufacturer’s installation requirements.

This package also includes an 8L heating expansion vessel and universal vessel wall mount, providing important components for the heating-system installation.

Amptec C900 9kW Electric Boiler

The Amptec C900 is part of the Heatrae Sadia Amptec range of electric flow boilers. The standard C900 is rated at 9kW at 240V, equivalent to approximately 30,700 BTU/h.

The boiler has a slim profile of approximately 1050mm high × 90mm wide × 90mm deep, making it considerably narrower than many conventional boiler designs.

Key Features

• 9kW electric boiler output
• Heatrae Sadia Amptec C900
• Electric flow boiler
• Heat-only central heating boiler
• 8L heating expansion vessel included
• Universal expansion vessel wall mount included
• Suitable for sealed or open-vented heating systems
• Compatible with standard radiators
• Compatible with circulating pumps
• Compatible with programmers
• Compatible with room thermostats
• Compatible with thermostatic radiator valves
• User-adjustable heating temperature
• Electronic dual temperature control
• Solid-state electronic technology
• Front-panel boiler status indication
• Compact 90mm-wide design
• No flue required
• No gas supply or fuel tank required

Amptec C900 Boiler Pack Contents

This EuroFuelSupply package includes:

1. Heatrae Sadia Amptec C900 9kW Electric Boiler

The main C900 electric flow boiler provides the 9kW heating output.

2. 8L Heating Expansion Vessel

An 8-litre heating expansion vessel is included as part of the package.

3. Universal Expansion Vessel Wall Mount

The package includes a universal wall mount for the heating expansion vessel.

Always check the live product listing and supplied documentation for the exact contents of the package being ordered.

9kW Electric Flow Boiler for Central Heating

The Amptec C900 is a heat-only electric boiler, rather than a combination boiler.

It is designed to provide central-heating output to a suitable heating circuit. It can work with conventional heating controls and components such as radiators, circulating pumps, room thermostats, programmers and thermostatic radiator valves.

Domestic hot water is not produced instantaneously by the C900. Where domestic hot water is required, an appropriate cylinder and system arrangement must be provided.

Electric Boiler for Homes Without Mains Gas

The Amptec C900 can be considered where an electric central-heating boiler is preferred or where mains gas is unavailable.

Unlike a gas-fired boiler, the Amptec does not require a combustion flue or gas supply. This can provide greater flexibility in locations where installing a conventional gas boiler and flue is impractical.

However, the electrical supply must be correctly sized for the boiler’s electrical load and the installation must comply with applicable electrical regulations.

Compact 9kW Electric Boiler

The C900 has a narrow body measuring approximately:

1050mm high × 90mm wide × 90mm deep

Its slim 90mm width makes it useful where installation space is restricted.

The manufacturer lists the C900 at approximately 7.5kg in its current Amptec product range.

Amptec C900 Temperature Control

The standard C900 is a C-series Amptec boiler with an operating temperature control range of approximately 65°C to 80°C.

The boiler incorporates electronic dual control and safety systems designed to monitor operation and protect against excessive temperature conditions.

Amptec C900 Specifications

The manufacturer confirms the C900’s 9kW rating, 1050 × 90 × 90mm dimensions, 1.3-litre water content, 22mm connections, maximum 3-bar operating pressure and D ErP rating.

Electrical Requirements

The C900 is a high-load electrical appliance. Manufacturer documentation lists a 38A supply current at 240V and a 50A recommended MCB for the C900.

The boiler must be permanently connected to the electrical supply through an appropriate double-pole linked switch and installed in accordance with applicable electrical regulations.

Installation should therefore be carried out by a suitably qualified heating and electrical professional.

Electric Boiler for Radiator Systems

The Amptec C900 can be connected to a suitable radiator-based central heating system.

It is compatible with standard:

• Radiators
• Circulating pumps
• Room thermostats
• Programmers
• Thermostatic radiator valves

Correct boiler sizing depends on factors including property size, insulation, heat loss and whether the system also needs to supply domestic hot water. The manufacturer recommends appropriate system sizing based on the specific property and heating requirements.

Sealed and Open-Vented Heating Systems

The Amptec C900 can be used with suitable sealed or open-vented heating systems.

The installation must include the required system components and comply with the manufacturer’s installation instructions. The included 8L expansion vessel should be installed as specified for the particular heating system.

Electric Boiler Installation

The Amptec C900 must be installed by a suitably qualified professional.

Installation requirements include:

• Correct electrical supply
• Appropriate protective devices
• Suitable heating pipework
• Correct flow rate
• Expansion and safety components
• Suitable circulating pump
• Appropriate heating controls
• Correct system pressure
• Compliance with applicable electrical and heating regulations

The manufacturer specifies a minimum flow requirement of 12 litres/minute for the 9kW C900, and the boiler uses 22mm pipe connections.

Amptec C900 Safety Features

The Amptec incorporates several control and protection features, including dual control circuits, dual switching of the elements, self-check circuitry, fault indication and resettable over-temperature protection.

These features do not replace correct installation, servicing and electrical protection.

Buy Heatrae Sadia Amptec C900 9kW Electric Boiler Pack

The Heatrae Sadia Amptec C900 9kW Electric Boiler Pack is designed for customers looking for a compact electric central-heating boiler together with an 8L heating expansion vessel and universal wall mount.

It is particularly relevant for heating installations where an electric flow boiler is preferred and a conventional gas boiler, flue or fuel tank is not required.

Check the current price, stock availability and exact package contents before ordering.

Amptec C900 Electric Boiler Europe

For customers searching for a 9kW electric boiler in Europe, the Amptec C900 provides a clear model-specific option for central-heating applications.

Searches for terms such as Heatrae Sadia Amptec C900, Amptec C900 9kW electric boiler, 9kW electric flow boiler, electric boiler for radiators and electric central heating boiler can all be supported naturally through this product page without keyword stuffing.

Amptec C900 vs Other Amptec Models

The Amptec range includes 4kW, 6kW, 9kW, 11kW and 12kW standard models. The C900 is the 9kW standard model, while the U901 is the 9kW underfloor-heating version.

Choose the boiler output based on the actual heating load and system design rather than simply selecting a higher-rated model.

For professional boiler sizing, consult a qualified heating engineer.