Innovita Amalfi Eco 17 RS i HM LPG Gas Water Heater with Flue Kit

Innovita Amalfi Eco 17 LPG gas water heater

The Innovita Amalfi Eco 17 RS i HM LPG Gas Water Heater is a high-capacity instantaneous gas water heater designed to provide domestic hot water on demand using LPG.

The Amalfi Eco 17 RS i HM combines 17 L/min hot-water production, Low-NOx combustion, electronic flame modulation, sealed-chamber operation and A-rated energy efficiency in a compact internal wall-mounted appliance.

Innovita specifies the LPG version with a nominal hot-water production of 17 litres per minute at a 25°C temperature rise, an XL load profile, A energy efficiency class, 1:6 modulation and a starting water flow of 2.0 L/min.

Key Features of the Innovita Amalfi Eco 17 LPG

17 L/min Instantaneous Hot Water

The Amalfi Eco 17 is designed to heat water as it is required rather than storing a large volume of hot water in a conventional cylinder.

Innovita specifies 17 L/min at ΔT25°C, making this model the highest-capacity unit in the current Amalfi Eco range. The actual delivered flow depends on incoming water temperature, water pressure, selected outlet temperature and installation conditions.

LPG Gas Operation

This version is configured for LPG operation.

Innovita’s current product table identifies the LPG Amalfi Eco 17 RS i HM as product code 30006802. The corresponding natural-gas model is 30006801.

Sealed-Chamber Design

The Amalfi Eco 17 RS i HM is an internal sealed-chamber instantaneous gas water heater.

This design uses a dedicated combustion and flue arrangement and is intended for suitable internal installations.

Low-NOx Combustion

Innovita identifies Low-NOx emissions as a key feature of the Amalfi Eco range.

The Amalfi Eco 17 incorporates a Low-NOx burner with two-stage operation and electronically managed combustion.

High 1:6 Modulation

The Amalfi Eco 17 RS i HM features a modulation ratio of up to 1:6.

The high-modulation HM system is designed to help maintain stable hot-water temperature under changing demand, including lower water-flow conditions.

A Energy Efficiency Class

Innovita specifies the Amalfi Eco 17 RS i HM with an A energy efficiency class and XL load profile.

This makes the 17 L/min model particularly relevant for customers searching for a higher-capacity, efficient instantaneous LPG water heater.

Technical Specifications

These specifications are based on Innovita’s current Amalfi Eco 17 RS i HM manufacturer information.

Electronic Flame Modulation

The Amalfi Eco 17 uses electronic management of the gas valve and flame to respond to hot-water demand.

Innovita combines its HM modulation system with a high-frequency flow meter and NTC temperature sensing to support temperature stability and rapid response when hot water is requested.

Automatic Combustion Control

The Amalfi Eco 17 RS i HM incorporates an Automatic Combustion Control system.

This is designed to monitor and manage combustion conditions as part of the appliance’s electronic control system.

Compact Wall-Mounted Design

Despite its 17 L/min capacity, the Amalfi Eco 17 maintains a compact wall-mounted format.

Innovita specifies dimensions of approximately 619 mm high × 385 mm wide × 230 mm deep, with an appliance weight of approximately 17 kg.

Frost Protection

The Amalfi Eco 17 RS i HM is equipped with multiple anti-freeze heating elements.

Innovita states that the HM models incorporate seven frost-protection resistances and protection down to approximately -15°C external temperature.

The frost-protection feature does not change the appliance’s specified installation type: the Amalfi Eco 17 RS i HM is an internal water heater and must be installed according to the manufacturer’s requirements.

Flue Kit Configuration

This EuroFuelSupply product is positioned as the Innovita Amalfi Eco 17 LPG Gas Water Heater with Flue Kit.

The exact flue components supplied with the EuroFuelSupply package should be stated clearly in the WooCommerce product specifications.

Innovita’s current accessory documentation lists compatible 60/100 mm coaxial components, including a coaxial 90° bend, 45° bend, extensions, vertical connection section, condensate collectors and roof-terminal components, as well as separated 80 mm air/flue components for supported configurations.

The installer must select the approved flue arrangement appropriate to the installation. Do not substitute incompatible flue components.

Applications

The Innovita Amalfi Eco 17 LPG can be considered for suitable applications including:

• Houses
• Apartments
• Large domestic properties
• Kitchens
• Bathrooms
• Guest accommodation
• Holiday properties
• LPG-powered domestic hot-water systems
• Properties requiring higher instantaneous hot-water flow
• Suitable light-commercial applications where permitted by the installation requirements

The 17 L/min capacity makes the Amalfi Eco 17 the highest-capacity model in Innovita’s current Amalfi Eco range.

Why Choose the Innovita Amalfi Eco 17 LPG?

The Amalfi Eco 17 combines a high instantaneous hot-water flow rate with compact sealed-chamber construction.

Key features include:

• Up to 17 L/min at ΔT25°C
• LPG operation
• A energy efficiency class
• XL load profile
• Low-NOx combustion
• Up to 1:6 flame modulation
• Sealed-chamber operation
• Internal wall-mounted installation
• Electronic gas-valve control
• Automatic Combustion Control
• High-frequency flow meter
• NTC temperature sensing
• IPX5D protection
• Built-in frost protection
• Compact 619 × 385 × 230 mm dimensions

These features make the product particularly relevant to customers searching for a 17 L/min LPG instantaneous gas water heater.

17 L/min LPG Instantaneous Water Heating

The Amalfi Eco 17 is designed for customers who need a higher level of instantaneous hot-water production.

Rather than storing a large quantity of hot water in a cylinder, the appliance heats water as it passes through the unit.

The manufacturer specifies:

17 L/min at ΔT25°C

Actual hot-water delivery depends on incoming water temperature, water pressure, outlet temperature and system conditions.

Installation Requirements

The Innovita Amalfi Eco 17 LPG is a gas appliance and must be installed and commissioned by a suitably qualified professional.

The installer should verify:

• LPG supply and pressure
• Water pressure
• Water flow
• Appliance location
• Flue configuration
• Flue terminal position
• Combustion requirements
• Required clearances
• Electrical requirements
• Applicable national regulations
• Gas safety requirements
• Manufacturer installation instructions

The correct Innovita-approved flue system must be used for the selected installation configuration.

Do not attempt to install, convert or modify the gas appliance or flue system yourself.

European Installation Considerations

The Amalfi Eco 17 LPG is relevant to European customers looking for a high-capacity LPG instantaneous water heater.

However, gas specifications, installation rules, flue requirements and national regulations can vary across Europe.

Before purchasing, customers should confirm that the specific appliance and flue configuration are suitable for the intended country and installation.

EuroFuelSupply supplies heating and hot-water equipment to customers across European markets.

Frequently Asked Questions

What is the Innovita Amalfi Eco 17 LPG?

The Innovita Amalfi Eco 17 LPG is an internal sealed-chamber instantaneous gas water heater designed to provide hot water on demand using LPG.

How much hot water does the Amalfi Eco 17 produce?

Innovita specifies a maximum hot-water production of 17 litres per minute at a 25°C temperature rise.

Is the Amalfi Eco 17 available for LPG?

Yes. Innovita lists the LPG version as Amalfi Eco 17 RS i HM, product code 30006802.

Is the Amalfi Eco 17 an instantaneous water heater?

Yes. It is an instantaneous gas water heater designed to heat water when required rather than store a large volume in a conventional cylinder.

Is the Amalfi Eco 17 installed indoors?

Yes. Innovita specifies the Amalfi Eco 17 RS i HM as an internal appliance.

What is the energy efficiency rating?

The Amalfi Eco 17 RS i HM has an A energy efficiency class and XL load profile.

What is the modulation ratio?

The manufacturer specifies a modulation ratio of up to 1:6.

What are the dimensions of the Amalfi Eco 17?

The dimensions are approximately 619 × 385 × 230 mm, with a weight of approximately 17 kg.

Does the Amalfi Eco 17 have Low-NOx technology?

Yes. Innovita identifies the Amalfi Eco 17 as using a Low-NOx burner with electronically managed operation.

Does the Amalfi Eco 17 have frost protection?

Yes. Innovita specifies seven frost-protection resistances and protection down to approximately -15°C external temperature for the HM range.

Does this product include a flue kit?

This EuroFuelSupply listing is specifically positioned as the Innovita Amalfi Eco 17 LPG Gas Water Heater with Flue Kit. The exact components included should be clearly stated in the product’s package contents.

Buy Innovita Amalfi Eco 17 LPG Gas Water Heater in Europe

Looking to buy an Innovita Amalfi Eco 17 LPG gas water heater with flue kit?

EuroFuelSupply supplies heating and hot-water products to customers across Europe, including LPG water heaters, gas water heaters and other heating equipment.

For availability, delivery information, technical questions or larger orders, contact EuroFuelSupply before purchasing.

Product: Innovita Amalfi Eco 17 RS i HM
LPG Product Code: 30006802
Fuel: LPG
Type: Sealed-chamber instantaneous gas water heater
Hot-water production: 17 L/min at ΔT25°C
Energy class: A
Load profile: XL
Modulation: Up to 1:6
Installation: Internal
Flue: Compatible/supplied flue-kit configuration
Brand: Innovita