Bullfinch 1400 Propane Gas Space Heater – 15–25kW

Bullfinch 1400 Propane Gas Heater

The Bullfinch 1400 Propane Gas Space Heater is a high-output industrial heating solution designed for suitable commercial, industrial and temporary heating applications. With adjustable heat output and no requirement for an electrical power supply, it provides portable propane heating where rapid heat is required.

The Bullfinch 1400 is particularly suited to warehouses, workshops, factories, agricultural buildings, outhouses, construction environments and drying applications where adequate ventilation and the manufacturer’s installation requirements can be provided.

High-Output 15–25kW Propane Heating

The Bullfinch 1400 provides adjustable high-output heat for demanding heating applications.

Its swirl burner produces a strong flow of convected heat, helping distribute warmth throughout suitable spaces without requiring an electrically powered fan.

The heater is designed for applications where a higher-output portable gas heater is required, including:

• Warehouses
• Workshops
• Factories
• Garages
• Agricultural buildings
• Outhouses
• Construction sites
• Temporary work areas
• Building drying
• Plaster and concrete drying applications

The correct heater must always be selected according to the building size, ventilation, heat requirement and manufacturer’s instructions.

Bullfinch 1400 Propane Gas Heater

The Bullfinch 1400 is designed specifically for propane gas operation.

Unlike electric industrial heaters, the Bullfinch 1400 does not require a mains electrical supply to produce heat. This makes it useful for suitable locations where electrical power is unavailable or where portable fuel-powered heating is preferred.

A suitable regulator and gas hose arrangement must be used in accordance with the manufacturer’s requirements.

The manufacturer specifies that the heater requires a regulator with a maximum outlet pressure of 1 bar. Check the exact regulator and hose requirements before installation.

Industrial Propane Space Heater

The Bullfinch 1400 is an industrial rather than a typical domestic room heater.

Its high heat output and robust construction make it suitable for professional applications where rapid supplemental heating is required.

Typical applications include:

Warehouse Heating

The Bullfinch 1400 can provide portable propane heat for suitable warehouses and storage buildings where adequate ventilation is available.

Workshop Heating

Workshops and garages can benefit from portable high-output heating when additional warmth is required during cold working conditions.

Construction Site Heating

The heater can be used for suitable temporary construction heating applications where propane fuel and appropriate ventilation can be provided.

Agricultural Building Heating

The Bullfinch 1400 can be considered for suitable agricultural and farm buildings, subject to the application, ventilation and manufacturer’s requirements.

Building Drying

One of the Bullfinch 1400’s established applications is drying out buildings. Its high heat output and rapid distribution of warm air make it useful for suitable drying applications.

It can be used in appropriate professional settings for drying building materials and helping remove moisture, subject to proper ventilation and safe operating procedures.

No Electricity Required

A major advantage of the Bullfinch 1400 is that it does not require an electrical supply for heating operation.

The heater uses propane gas and a mechanical/automatic ignition system rather than relying on mains electricity.

This makes it useful for:

• Construction sites
• Temporary work areas
• Workshops without convenient mains power
• Warehouses
• Agricultural buildings
• Building-drying projects
• Other suitable locations requiring portable industrial heat

Swirl Burner for Rapid Heat Distribution

The Bullfinch 1400 uses a swirl burner designed to produce compact, high-convection heat.

The resulting airflow helps distribute heat around the operating area without an electrically powered circulation fan.

This design is particularly suited to open or large well-ventilated working environments where rapid distribution of heat is required.

Automatic Piezo Ignition

The Bullfinch 1400 features automatic Piezo ignition, allowing the heater to be started without a separate electrical power connection.

The ignition system is integrated into the heater and is designed for convenient operation when the correct propane supply and regulator arrangement are connected.

Flame Failure Protection

The heater incorporates flame-failure security.

This safety system is designed to interrupt the gas supply if the flame is extinguished, helping prevent continued release of fuel.

Always inspect and operate the appliance according to the manufacturer’s instructions.

Double-Skinned Top

The Bullfinch 1400 features a double-skinned top designed to reduce the temperature of the external top surface during operation.

This construction is intended to improve the heater’s suitability for demanding working environments while still requiring appropriate clearances and safe positioning.

Bullfinch 1400 Technical Specifications

Bullfinch technical documentation lists operating pressures of 0.5, 0.7 and 1.0 bar and corresponding heat inputs of approximately 17kW, 21kW and 25kW. The manufacturer’s product page describes the output range as 15–25kW.

What Can the Bullfinch 1400 Be Used For?

The Bullfinch 1400 is designed for suitable professional applications including:

• Industrial buildings
• Warehouses
• Workshops
• Factories
• Outhouses
• Agricultural buildings
• Construction sites
• Temporary work areas
• Building drying
• Suitable commercial heating applications

It is particularly useful where portable, high-output propane heating is required without a mains electrical connection.

Bullfinch 1400 for Drying Buildings

The Bullfinch 1400 is specifically promoted by the manufacturer for drying out buildings.

Its high heat output and rapid heat distribution can assist suitable drying projects involving buildings and construction materials.

However, heating alone does not replace appropriate moisture management, ventilation or professional drying procedures. The building and materials must be assessed for the specific drying application.

Ventilation Requirements

The Bullfinch 1400 is an unflued gas heater, so adequate ventilation is essential.

The manufacturer’s safety information states that ventilation requirements for unflued appliances depend on the specific appliance and application. Bullfinch provides general guidance for confined-space use and states that its appliance instructions must also be followed.

Never operate the heater in an unsuitable sealed environment.

Before use:

• Read the complete operating instructions.
• Ensure adequate ventilation.
• Use the correct propane supply.
• Use the correct regulator.
• Check the hose and connections for damage.
• Maintain appropriate clearances.
• Keep combustible materials away from the heater.
• Ensure the heater is positioned securely.
• Have servicing carried out by competent personnel.

Is the Bullfinch 1400 Suitable for a Home?

The Bullfinch 1400 is primarily an industrial and commercial space heater, rather than a standard domestic room heater.

The manufacturer describes it for warehouses, factories, outhouses and drying applications. It should only be used in environments that meet the manufacturer’s ventilation, room-size, positioning and safety requirements.

For normal residential heating, a purpose-designed domestic gas heater may be more appropriate.

Buy Bullfinch 1400 Propane Gas Heater in Europe

If you need a Bullfinch 1400 propane gas heater for commercial, industrial, workshop, warehouse or building-drying applications, EuroFuelSupply can supply heating equipment to supported European markets.

For individual purchases, trade orders, commercial projects or wholesale requirements, contact EuroFuelSupply with your required quantity and delivery destination.

For larger orders, EuroFuelSupply also provides wholesale heating equipment and commercial heating supply enquiries.

Always confirm current availability, delivery requirements, regulator configuration and local installation requirements before ordering.