Daikin Perfera 3×1 Air Conditioner with Wi-Fi – 2.0 kW + 2.5 kW + 3.5 kW

Daikin Perfera 3×1 2.0 kW 2.5 kW 3.5 kW

The Daikin Perfera 3×1 air conditioner with Wi-Fi is a premium multi-split heating and cooling system designed to provide comfortable indoor climate control across three separate rooms.

This configuration combines 2.0 kW, 2.5 kW and 3.5 kW indoor units, allowing different capacity levels to be used for rooms with different heating and cooling requirements.

The system combines Daikin’s Perfera technology, inverter operation, Wi-Fi-connected control, intelligent airflow and air-purification technologies.

Daikin’s European documentation specifically lists the 2.0 + 2.5 + 3.5 kW Perfera combination for compatible 3MXM52 outdoor-unit configurations.

Daikin Perfera 3×1 Multi-Split Air Conditioner

A 3×1 multi-split air conditioner connects three indoor units to one compatible outdoor unit.

This makes the configuration particularly useful for properties where several rooms need independent heating and cooling without installing a separate outdoor unit for every indoor unit.

Daikin states that compatible Perfera multi-split systems can connect up to three indoor units to one outdoor unit, with the indoor units individually controllable.

Suitable applications can include:

• Living room + bedroom + bedroom
• Living room + bedroom + home office
• Three-bedroom apartments
• Master bedroom + guest bedroom + office
• Larger residential properties
• Home offices
• Residential extensions
• Suitable light-commercial spaces

The exact outdoor-unit and indoor-unit combination should always be verified against Daikin’s approved combination documentation.

2.0 kW + 2.5 kW + 3.5 kW Configuration

This configuration provides three different indoor capacity classes.

2.0 kW Indoor Unit

The 2.0 kW unit can be suitable for an appropriately sized bedroom, study, office or other smaller room, depending on the property’s heat load.

2.5 kW Indoor Unit

The 2.5 kW unit provides a higher capacity and may be suitable for a medium-sized bedroom, office or living area depending on insulation, glazing and other factors.

3.5 kW Indoor Unit

The 3.5 kW unit provides a higher capacity for a larger room or area when correctly sized.

Daikin’s European Perfera documentation specifically identifies 2.0 + 2.5 + 3.5 kW as a compatible multi-split combination for the 3MXM52A2V1B(8) outdoor unit, with A+++ cooling and heating efficiency listed for the specified combinations.

Wi-Fi Control

The Daikin Perfera Wi-Fi capability makes connected climate control available on compatible configurations.

Daikin states that compatible Perfera systems can be managed using the Daikin Residential Controller app, with supported voice-control options including Alexa and Google Home.

Depending on the exact configuration and accessories supplied, users can benefit from functions such as:

• Temperature adjustment
• Operating-mode selection
• Individual indoor-unit control
• Remote climate management
• Scheduling
• System monitoring

The exact Wi-Fi hardware supplied should be confirmed against the configuration being sold.

Heating and Cooling

The Daikin Perfera 3×1 is designed for year-round indoor climate control.

Cooling

The system can provide cooling during warmer periods when correctly sized and professionally installed.

Heating

Perfera is an air-to-air heat-pump system that can also provide heating during colder periods.

Daikin describes Perfera as an all-year-round heating and cooling solution, with selected configurations achieving high seasonal efficiency ratings.

High Energy Efficiency

One of the strongest selling points of this particular configuration is its potential energy efficiency.

Daikin’s European catalogue specifically lists the 2.0 + 2.5 + 3.5 kW configuration with the 3MXM52A2V1B(8) outdoor unit and identifies A+++ for cooling and A+++ for heating for the listed combination.

Important

Only display A+++ cooling and A+++ heating on your product page if the outdoor unit and exact indoor-unit models you are selling correspond to the Daikin combination documented for that rating.

This prevents inaccurate specifications and keeps the product page trustworthy.

Daikin Inverter Technology

Perfera uses inverter technology to adjust system output according to the heating or cooling demand.

Instead of continuously operating at maximum capacity, the system can modulate its operation as indoor conditions change.

Potential benefits include:

• Consistent indoor temperatures
• Efficient operation
• Improved comfort
• Reduced temperature fluctuations
• Responsive heating and cooling

Actual energy consumption depends on climate, building characteristics, installation, settings and usage.

Three-Room Climate Control

The Daikin Perfera 3×1 configuration is designed for three indoor spaces.

An example application could be:

This is an example only. The appropriate capacity for each room should be determined using a proper heat-load assessment.

Daikin confirms that compatible multi-split configurations allow the indoor units to be controlled individually.

Why Choose Daikin Perfera 3×1?

Three Indoor Units

Provide climate control across three rooms or zones.

2.0 + 2.5 + 3.5 kW

Three different capacity classes allow the system to be configured for rooms with different requirements.

One Outdoor Unit

The three indoor units connect to one compatible multi-split outdoor unit.

Wi-Fi Control

Compatible connected control provides convenient management.

Heating and Cooling

One system provides year-round climate control.

High Efficiency

Selected 3MXM52 + Perfera combinations can achieve A+++ seasonal efficiency in both cooling and heating according to Daikin’s European documentation.

Advanced Air Purification

Perfera is designed to provide more than heating and cooling.

Daikin highlights Flash Streamer technology, which uses electrons to trigger chemical reactions that help break down airborne allergens and remove unpleasant odours.

The system also uses filtration technologies designed to improve indoor air quality.

Intelligent Airflow

Compatible Perfera wall-mounted units include intelligent airflow technologies.

Daikin highlights a 2-area motion detection sensor that can redirect airflow away from occupants and automatically switch to an energy-saving setting when no people are detected.

Daikin also highlights Comfort+ airflow technology designed to distribute air more evenly throughout the room.

Exact features should be verified against the specific indoor-unit model supplied.

Quiet Operation

Perfera is designed for comfortable indoor operation with low sound levels.

Daikin reports sound levels as low as 19 dBA on applicable next-generation Perfera configurations.

For your product page, however, don’t state 19 dBA as the exact operating noise of every indoor unit unless the technical documentation for the particular units confirms it.

Ideal Applications

Three-Bedroom Homes

The three indoor units can be used for separate bedrooms or other suitably sized rooms.

Living Room + Two Bedrooms

A typical application can use the 3.5 kW unit for the larger living area and the smaller units for bedrooms, subject to heat-load calculations.

Apartment

The 3×1 configuration can provide independent climate control across three rooms.

Home Office

One indoor unit can be dedicated to a home office while the other units serve living areas.

Residential Renovations

A multi-split system can help reduce the number of outdoor units required.

Light Commercial

The system can be considered for suitably sized offices and similar spaces.

Key Features

• Daikin Perfera
• 3×1 multi-split air conditioner
• 2.0 kW indoor unit
• 2.5 kW indoor unit
• 3.5 kW indoor unit
• Wi-Fi connectivity
• Heating and cooling
• Inverter technology
• Individual room control
• Three-room climate control
• One compatible outdoor unit
• Intelligent airflow
• Motion detection on applicable models
• Flash Streamer air purification
• High seasonal efficiency on selected combinations
• R-32 refrigerant on applicable configurations
• Residential applications
• Suitable light-commercial applications

Daikin identifies R-32 as the refrigerant used on its current Perfera/3MXM configurations and notes its lower environmental impact compared with R-410A.

Product Specifications

Important: The 8.0 kW figure above is simply the sum of the three indoor-unit nominal capacity classes. Do not present 8.0 kW as the outdoor unit’s nominal system capacity.

The exact outdoor-unit model, SEER, SCOP, energy class and operating capacities should be taken from the manufacturer’s documentation for the exact combination you sell.

Professional Installation

The Daikin Perfera 3×1 system should be installed and commissioned by a suitably qualified HVAC professional.

Before installation, the installer should verify:

• Exact indoor/outdoor combination
• Cooling load
• Heating load
• Refrigerant pipe lengths
• Maximum pipe distances
• Height differences
• Electrical requirements
• Condensate drainage
• Indoor-unit positions
• Outdoor-unit location
• Wi-Fi compatibility
• Local European requirements

Daikin’s official documentation should be used to verify the exact approved combination before installation.

Frequently Asked Questions

What is a Daikin Perfera 3×1?

A Daikin Perfera 3×1 is a multi-split air-conditioning system with three indoor units connected to one compatible outdoor unit.

What capacities are included?

This configuration includes 2.0 kW + 2.5 kW + 3.5 kW indoor units.

How many rooms can the system serve?

The configuration has three indoor units and is designed to provide climate control across three rooms or zones.

Can the indoor units be controlled individually?

Yes. Daikin states that compatible Perfera multi-split configurations provide individual control of the indoor units.

Does Daikin Perfera provide heating?

Yes. Perfera is designed for both heating and cooling.

Does this Daikin Perfera have Wi-Fi?

Compatible Perfera systems support connected control through the Daikin Residential Controller ecosystem.

Is the 2.0 kW unit suitable for a bedroom?

It may be suitable for an appropriately sized bedroom, but professional heat-load assessment is recommended.

Is the 3.5 kW unit suitable for a living room?

It may be suitable depending on room dimensions, insulation, glazing, solar exposure and other heat-load factors.

Can the three units operate independently?

They can be individually controlled, although Daikin notes that compatible indoor units operate simultaneously in the same heating or cooling mode.

What is the advantage of a 3×1 system?

Three indoor units can be connected to one compatible outdoor unit, reducing the number of outdoor units required.

Buy Daikin Perfera 3×1 2.0 + 2.5 + 3.5 kW

The Daikin Perfera 3×1 air conditioner with Wi-Fi – 2.0 kW + 2.5 kW + 3.5 kW provides a premium multi-room heating and cooling solution for suitable European homes, apartments and light-commercial environments.

With three indoor units, inverter technology, Wi-Fi control, individual room management, intelligent airflow and advanced air-purification technology, this configuration offers flexible year-round climate control.

Contact EuroFuelSupply for availability, European delivery and HVAC project enquiries.